Chapter 2 Cisco SDM Express Edit Mode
Reset to Factory Defaults
Microsoft Windows NT
From the Control Panel,
For a static IP address, click Specify an IP address. Enter the IP address
10.10.10.2or any other address in the 10.10.10.0 subnet greater than 10.10.10.1. Enter the subnet 255.255.255.248. You can leave other fields blank. Click OK.
Microsoft Windows ME
From the Control Panel,
For a static IP address, click Specify an IP address. Enter the IP address
10.10.10.2or any other address in the 10.10.10.0 subnet greater than 10.10.10.1. Enter the subnet 255.255.255.248. You can leave other fields blank. Click OK.
Microsoft Windows 2000
From the Control Panel, select Network and Dialup Connections/Local Area Connections. Select the Ethernet adapter in the Connect Using field. Select Internet Protocol, and click Properties. Click Obtain an IP Address Automatically to obtain a dynamic IP address.
For a static IP address, click Specify an IP address. Enter the IP address
10.10.10.2or any other address in the 10.10.10.0 subnet greater than 10.10.10.1. Enter the subnet 255.255.255.248. You can leave other fields blank. Click OK.
Microsoft Windows XP
Click Start, select Settings, Network Connections, and then select the LAN connection you will use. Click Properties, select Internet Protocol TCP/IP, and click the Properties button. Click Obtain an IP Address Automatically to obtain a dynamic IP address.
For a static IP address, click Specify an IP address. Enter the IP address
10.10.10.2or any other address in the 10.10.10.0 subnet greater than 10.10.10.1. Enter the subnet 255.255.255.248. You can leave other fields blank. Click OK.
| Cisco SDM Express |