Chapter 2 Cisco SDM Express Edit Mode
Tools
Source Field
Select or enter the IP address where you want the ping to originate. If the address you want to use is not in the list, you can enter a different one in the field. The ping can originate from any interface on the router. By default, the ping command originates from the outside interface with the connection to the remote device.
Destination Field
Select the IP address that you want to ping. If the address you want to use is not in the list, you can enter a different one in the field.
To ping a remote peer:
Specify the source and destination, and click Ping. You can read the output of the ping command to determine whether the ping was successful.
To clear the output of the ping command:
Click Clear.
Update SDM from Cisco.com
You can update SDM Express and SDM directly from Cisco.com. SDM checks Cisco.com for the versions available and informs you if there is a version newer than the one currently running on the router. You can then update SDM using the Update wizard.
To update SDM from Cisco.com:
Step 1 Select Update SDM from Cisco.com from the Tools menu. Selecting this option starts the update wizard.
Step 2 Use the update wizard to obtain the SDM files and copy them to your router.
|
| Cisco SDM Express |
|
|
|
|
| ||
|
|
| ||
|
|
|