321 Studios OL-7141-04 manual Serial Connection, Interface List, Refresh Button

Page 23

Chapter 1 Cisco SDM Express

WAN Interface Selection

Interface List

Displays the interface name, IP address, and interface type for all WAN interfaces. If no IP address is configured for an interface, the text “no IP address” is displayed.

Note If you did not configure the default LAN interface with a new IP address in the LAN Interface Configuration window, it is listed in this window, and can be configured as a WAN interface.

Refresh Button

Visible if you are editing an initial configuration. Click Cisco SDM Express

Buttons for more information.

Serial Connection

Create or edit a serial connection in this window.

Encapsulation List

Select the encapsulation for this connection. If you are editing a connection, you cannot change the encapsulation type in this window. You must delete the connection, and then create a new connection with the encapsulation type you need.

•Frame Relay—A switched data link layer protocol that handles multiple virtual circuits using HDLC encapsulation between connected devices.

•HDLC—High-Level Data Link Control. A bit-oriented synchronous data link layer protocol developed by the International Standards Organization (ISO). HDLC specifies a data encapsulation method on synchronous serial links using frame characters and checksums.

•PPP—Point-to-Point Protocol.

Authentication Details

If you select PPP encapsulation, you can provide authentication information that your Internet service provider may require.

		Cisco SDM Express
		Cisco SDM Express
	OL-7141-04			1-17
	OL-7141-04			1-17

Image 23

Contents Cisco SDM Express User’s Guide Cisco SDM Express User’s Guide N T E N T S Contents Cisco SDM Express Edit Mode Contents A P T E R WelcomeDomain Name Field Basic ConfigurationUsername and Password Fields Hostname FieldSDM Express Enable Secret Password FieldRouter Provisioning CNS Server Provision From USB TokenUSB Token or USB Flash Secure Device ProvisioningProvision From USB Flash File Selection Size Wireless Interface ConfigurationLAN Interface Configuration NameSubnet Mask Field Wireless Parameters FieldsInterface/Bridge-to-Interface List IP Address FieldStarting IP Address Field Dhcp Server ConfigurationEnable Dhcp server on the LAN interface Check Box Refresh, Apply Changes, Discard Changes ButtonsSecondary Domain Name Server Field Ending IP Address FieldPrimary Domain Name Server Field Address Type List Enable PPPoE Check BoxInternet WAN Ethernet Interface Use these DNS values for Dhcp clients Check BoxUsername Field Authentication Type Check BoxPassword Field Confirm Password FieldInternet WAN User Specified Encapsulation Status Icon and Enable or Disable ButtonInternet WAN Autodetect Encapsulation Virtual Circuit Identifier Field Encapsulation ListVirtual Path Identifier Field IP Address for Remote Connection in Central Office Field Add Connection, Edit, Delete Buttons Enable or Disable ButtonWAN Interface Selection Refresh Button Serial ConnectionInterface List IP Address and Subnet Mask Fields Frame Relay Configuration Settings LinkUse Ietf Frame Relay Encapsulation Check Box Frame Relay Configuration SettingsDlci Field LMI Type FieldCNS Server Information Internet WAN Advanced OptionsSecondary DNS Field Firewall ConfigurationPrimary DNS Field Security Settings Disable Services that Involve Security Risks Check Box Disable Snmp Services on Your Router Check BoxSummary Enhance Security on Router Access Check BoxEncrypt Passwords Check Box Cisco Router and Security Device Manager Cisco Network ServicesSupplementary Help Disable Snmp Security SettingsDisable PAD Service Disable Finger ServiceDisable TCP Small Servers Service Disable IP Bootp Server Service Disable UDP Small Servers ServiceDisable CDP Disable IP Identification ServiceEnable Password Encryption Service Disable IP Source RouteEnable TCP Keepalives for Inbound Telnet Sessions Enable Netflow SwitchingEnable IP CEF Enable TCP Keepalives for Outbound Telnet SessionsEnable Sequence Numbers and Time Stamps on Debugs Set Scheduler Allocate Set Scheduler IntervalSet TCP Synwait Time Enable Unicast RPF on Outside Interfaces Enable LoggingDisable IP Redirects Disable IP Gratuitous ARPsDisable IP Directed Broadcast Disable IP Proxy ARPDisable IP Unreachables Disable MOP ServiceSet Minimum Password Length to Less Than 6 Characters Disable IP Mask ReplySet Banner Set Authentication Failure Rate to Less Than 3 RetriesEnable SSH for Access to the Router Enable Telnet SettingsAbout Button Cisco SDM Express ButtonsHelp Button Discard Changes Button Reconnecting to the Router After Initial ConfigurationExit Button Apply Changes ButtonTesting Your WAN Internet Connection Troubleshooting Tips SDP Troubleshooting TipsLAN Fields OverviewIcons Firewall Fields Internet WAN FieldsEdit/Delete Buttons Username/Login Password/Password is Encrypted FieldsRefresh/Apply Changes/Discard Changes Buttons Encrypt password using MD5 hash algorithm CheckboxBridge/Do not bridge LAN interface with wireless Checkbox Edit a UsernameNo WAN Available WirelessWAN-Unable to Configure WAN Interface LAN interface configuration FieldsFirewall Enable Firewall/Disable Firewall ButtonsDelete Connection Unable to Configure NAT Unable to configure Firewall WindowAdd or Edit Address Translation Rule Routing Select All Recommended by Cisco Checkbox Disable Services that Involve Security Risks CheckboxSynchronize with my local PC clock Checkbox Encrypt Passwords CheckboxPing ToolsDestination Field Update SDM from Cisco.comTo clear the output of the ping command Source FieldCCO Login Update SDM from Local PCUpdate SDM from CD Edit Date and Time Fields Date and Time PropertiesSynchronize Checkbox Apply Button Reset to Factory DefaultsSave Running Config to PC Write down these steps and then reset the routerReconfiguring Your PC with a Static or a Dynamic IP Address Microsoft Windows NT Feature Not Available Cisco SDM Express Edit Mode Feature Not Available D E IN-2