Chapter 1 Cisco SDM Express
WAN Interface Selection
•Username—Enter exactly as given to you by your Internet service provider or network administrator and is used as the username for CHAP and/or PAP authentication.
•Password—Enter exactly as given to you by your service provider. Passwords are case sensitive. For example, the password “test” is not the same as “Test”.
•Confirm Password—Reenter the same password that you entered in the previous box.
Address Type List
•Static IP address—Available with Frame Relay, PPP, and HDLC encapsulation types. If you choose static IP address, enter the IP address and subnet mask or the subnet bits in the fields provided.
•IP Unnumbered—Available with Frame Relay, PPP, and HDLC encapsulation types. Select IP Unnumbered if you want the interface to share an IP address that has already been assigned to another interface. Then, choose the interface whose IP address you want the interface that you are configuring to use.
•IP Negotiated—Available with PPP encapsulation type only. Select Easy IP (IP Negotiated) if the router will obtain an IP address by PPP/IPCP address negotiation.
IP Address and Subnet Mask Fields
If you select Static IP address, provide the IP address and subnet mask in these fields.
Frame Relay Configuration Settings Link
Click Frame Relay Configuration Settings for a description of the DLCI, LMI, and Use IETF Frame Relay Encapsulation fields.
| Cisco SDM Express |
1-18 | OL-7141-04 |
