321 Studios OL-7141-04 manual Address Type List

Chapter 1 Cisco SDM Express

Internet (WAN): User Specified Encapsulation

Address Type List

Select one of the following:

•Static IP Address—If you choose static IP address, enter the IP address and subnet mask or the subnet bits in the fields provided.

•Dynamic (DHCP Client)—If you choose Dynamic, the router will lease an IP address from a remote DHCP server. Enter the name of the DHCP server that will assign addresses.

•IP Unnumbered—Select IP Unnumbered if you want the interface to share an IP address that has already been assigned to another interface. Then, choose the interface whose IP address you want the interface that you are configuring to use.

•Easy IP (IP Negotiated)—SelectEasy IP (IP Negotiated) if the router will obtain an IP address by PPP/IPCP address negotiation.

IP Address for Remote Connection in Central Office Field

If you are configuring a G.SHDSL connection, enter the IP address of the gateway to which this link will connect. This IP address is supplied by the service provider or network administrator. The gateway is the system that the router must connect to in order to access to the Internet or to your organization’s WAN.

Authentication Type Check Box

Check the box for the type of authentication used by your service provider. If you do not know which type your service provider uses, you can check both boxes: the router will attempt both types of authentication, and one attempt will succeed.

CHAP authentication is more secure than PAP authentication.

Username Field

Enter the username given to you by your Internet service provider or network administrator and is used as the username for CHAP and/or PAP authentication.

Password Field

Enter the password exactly as given to you by your service provider. Passwords are case sensitive. For example, the password “test” is not the same as “Test”.

	Cisco SDM Express
OL-7141-04		1-15