
•Normally the idle time for the menu mode is 30 seconds before the system returns to standby. However, for setting the time, the idle time is extended to two minutes.
•Press and hold ![]()
or
![]()
to quickly scroll through the numbers on the display.
Setting the Time
The clock on the answering system starts when power is supplied to the base. Follow these steps to set the clock to the correct time.
1)Press menu.
The system announces the current time. The message counter displays the day of the week (from “
” Sunday to “
” Saturday).
2)Press ![]()
or ![]()
until the correct day is announced and the corresponding number appears.
3)Press set/ringer to select the day.
4)Press ![]()
or ![]()
until you hear the correct hour setting.
The numbers “
” through “ ![]()
” appear on the base as each hour is announced.
5)Press set/ringer to select the hour.
6)Press ![]()
or ![]()
until you hear the correct minute setting.
The numbers “ ![]()
” through “ ![]()
” appear on the base as each minute is announced.
7)Press set/ringer to select the minute.
8)Press ![]()
or ![]()
until you hear the correct AM or PM setting. The message counter displays “ ![]()
![]()
” or “ ![]()
![]()
”.
9)Press set/ringer to select the AM/PM setting.
A confirmation tone sounds, the system announces “Time” and, the day and time are announced for your review.
Setting a Personal Security Code
To play your messages from a remote location, you will need to enter a ![]()
- ![]()
![]()
![]()
). To select a PIN, perform the following steps:
1)Press menu twice. The current PIN code is announced as it appears on the base.
2)Press ![]()
or ![]()
until the desired number appears.
3)Press set/ringer to select the PIN code.
A confirmation tone sounds, the system announces “Security code” and the new PIN code.