For your convenience a remote operation card is provided for you to use while away from home (refer to page 67).
Remote Operation
You can operate your answering system from a remote location using any
Remote access away from home
You can check, play, or delete messages, even record a new greeting message when you are away from home. Additionally, you can turn On or Off your answering system from a remote location.
•You must enter a command within 15 seconds of entering command waiting mode or the answering system automatically hangs up and returns to standby.
• The system will only playback messages for four minutes and then it returns to command waiting mode. To continue playing your messages, press # then 2 again within 15 seconds.
•If you enter an incorrect PIN code three times, you will hear a beep and the system will return to standby.
•During the remote operation, “ ” appears on the base.
1)Call your telephone number.
2)During the greeting message, press # and enter your PIN code within 2 seconds. (See “Setting a Personal Security Code”, page 44).
3)The answering system announces the current time and the number of messages stored in memory. You hear “To play incoming messages, press pound two. For help, press pound zero”. You will hear intermittent beeps.
4)You may select a command from the following chart:
Command Function
#then 1 Repeat a Message
#then 2 Playing incoming Messages
#then 3 Skipping a Message
#then 4 Deleting a Message
#then 5 Stop Operation
Command Function
#then 6 Answering System On
#then 7 Memo Record/Stop *
#then 8 Greeting Message Record/Stop *
#then 9 Answer System Off
#then 0 Help Guidance
*For Memo Record and Greeting Message Record function, the first time you enter the corresponding command, it starts the Recording function. If you want to stop the recording, press # then 7 or 8.