Uniden EXAI 985HS manual Direct wall plate mounting

Page 12

10

8 On the base unit, pull the handset retainer out of the slot. Rotate it clockwise 180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset

in place.

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

Avoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

Make sure the wall material is capable of supporting the weight of the base and handset.

Use #10 screws (minimum length of 1-3/8inches) with anchoring devices suitable for the wall material where the base unit will be placed.

1Insert two mounting screws into the wall, (with their

appropriate anchoring device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and screwheads for mounting the phone.

2 Refer to steps 1 through 9 on page 9 and 10 to mount the telephone.

Image 12
Contents A I 9 8 5 H S Introduction to Your NEW Phone Page Page Way Conference Feature Caller ID FeaturesGetting Started BasicsBase unit HandsetUniden Parts Department Choose the best location Connect the base unit Choose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemStandard wall plate mounting Direct wall plate mounting Use only Uniden Battery BT-905 Battery use time per charge When the battery charge becomes lowCleaning the battery contacts Do not use any liquids or solventsExample To select Cidcw Page Dialing from talk mode From the handsetFrom the base Dialing from standbyTo on When speaking with the base When speaking with the handsetWhen the phone is ringing Handset ringer switch Redialing from Standby Redialing from talk mode Intercom from the base to handset Intercom from the handset to baseTo transfer from the handset to the base To transfer from the base to the handsetMemory Dialing On the handsetMemory03 Stored On the base If you press Display a Programmed Number From the base Memory Store is With the handset With the base When speaking on the handset When speaking on the baseCaller ID Talk Page Deleting a Caller ID message When the pointer is at Yes Deleting all Caller ID names/numbersCalling a party from the Caller ID list Long Distance calls and Area codeStoring Caller ID messages in Memory dialing Page Selecting an Option Integrated Setting the clock Turning the answering system on/offSetting your greeting Preset MessageRecording your personal greeting Choosing between two greetingsAnnounce only feature Selecting the message record timeSelecting a PIN code Setting ring time switch Playing your message Repeating a message Skipping a messageDeleting a message Voice memoDeleting individual message Deleting all messagesRecording a conversation Remote access away from home Command FunctionRemote room monitor Turn on the answering machine remotelyAdditional Information To attach the beltclip To remove the beltclip Page Battery replacement and handling When slightly dirtyWhen very dirty When the charging terminals become dirtyBattery Information AC Adapter InformationTroubleshooting Your NEW Phone Symptom SuggestionSymptom Suggestion K, L W, X, Y, ZAt Uniden, we’ll take care of you Please do not Return this Product to the Place of PurchaseFor Purchasing a Uniden Phone