Uniden EXAI 985HS manual Standard wall plate mounting

Page 11

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.

1

2 - 7

1 Snap the wall mount adapter into the notches on the base.

2 Plug the telephone line cord to the

TEL LINE jack and the AC adapter to the DC IN 9V jack.

3 Plug the telephone line cord into the telephone outlet.

4 Place the AC adapter cord inside the molded wiring channel.

5 Plug the AC adapter into a standard

120V AC wall outlet.

6 Raise the antenna to a vertical position.

7 Align the mounting slots on the base with the mounting posts on the wall. Push in and down until the phone is firmly seated.

9

Image 11

Contents A I 9 8 5 H S Introduction to Your NEW Phone Page Page Basics Way Conference FeatureCaller ID Features Getting StartedHandset Base unitUniden Parts Department Choose the best location Connect the base unit If you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseStandard wall plate mounting Direct wall plate mounting Use only Uniden Battery BT-905 Do not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsExample To select Cidcw Page Dialing from standby Dialing from talk modeFrom the handset From the baseTo on When the phone is ringing When speaking with the baseWhen speaking with the handset Handset ringer switch Redialing from Standby Redialing from talk mode Intercom from the handset to base Intercom from the base to handsetTo transfer from the base to the handset To transfer from the handset to the baseOn the handset Memory DialingMemory03 Stored On the base If you press Display a Programmed Number From the base Memory Store is With the handset With the base When speaking on the base When speaking on the handsetCaller ID Talk Page Deleting a Caller ID message Deleting all Caller ID names/numbers When the pointer is at YesLong Distance calls and Area code Calling a party from the Caller ID listStoring Caller ID messages in Memory dialing Page Selecting an Option Integrated Turning the answering system on/off Setting the clockChoosing between two greetings Setting your greetingPreset Message Recording your personal greetingSelecting a PIN code Announce only featureSelecting the message record time Setting ring time switch Playing your message Skipping a message Repeating a messageDeleting all messages Deleting a messageVoice memo Deleting individual messageRecording a conversation Command Function Remote access away from homeTurn on the answering machine remotely Remote room monitorAdditional Information To attach the beltclip To remove the beltclip Page When the charging terminals become dirty Battery replacement and handlingWhen slightly dirty When very dirtyAC Adapter Information Battery InformationSymptom Suggestion Troubleshooting Your NEW PhoneSymptom Suggestion W, X, Y, Z K, LPlease do not Return this Product to the Place of Purchase At Uniden, we’ll take care of youFor Purchasing a Uniden Phone