Uniden EXAI 985HS Selecting the message record time, Selecting a PIN code, Announce only feature

Page 47

Press and hold or to quickly scroll

through numbers on the display.

Selecting the message record time

You can set your answering system to record messages up to one or four minutes long.

One minute option: move the REC TIME switch to 1.

Four minute option: move the REC TIME switch to 4.

ªAnnounce only feature:

The announce only feature plays an outgoing message, but it will not allow the caller to leave a message. Move the REC TIME switch to the ANN position.

The message counter LED displays “ ” when system is on standby.

Prerecorded outgoing message for Announce only feature is:

"Hello, no one is available to take your call."

Selecting a PIN code

To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number (PIN) code (00-99). To select a PIN, perform the following steps.

1 On the base, press and hold button until a tone sounds, and the LED displays 00.

2 To set the first number, press

or to scroll from 0 to 9. When the desired number appears in

the display, press .

3 To set the second number, press

or to scroll from 0 to 9. When the desired number

appears in the display, press . Then the entered PIN code

is announced.

45

Image 47

Contents A I 9 8 5 H S Introduction to Your NEW Phone Page Page Basics Way Conference FeatureCaller ID Features Getting StartedHandset Base unitUniden Parts Department Choose the best location Connect the base unit If you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseStandard wall plate mounting Direct wall plate mounting Use only Uniden Battery BT-905 Do not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsExample To select Cidcw Page Dialing from standby Dialing from talk modeFrom the handset From the baseTo on When the phone is ringing When speaking with the baseWhen speaking with the handset Handset ringer switch Redialing from Standby Redialing from talk mode Intercom from the handset to base Intercom from the base to handsetTo transfer from the base to the handset To transfer from the handset to the baseOn the handset Memory DialingMemory03 Stored On the base If you press Display a Programmed Number From the base Memory Store is With the handset With the base When speaking on the base When speaking on the handsetCaller ID Talk Page Deleting a Caller ID message Deleting all Caller ID names/numbers When the pointer is at YesLong Distance calls and Area code Calling a party from the Caller ID listStoring Caller ID messages in Memory dialing Page Selecting an Option Integrated Turning the answering system on/off Setting the clockChoosing between two greetings Setting your greetingPreset Message Recording your personal greetingSelecting a PIN code Announce only featureSelecting the message record time Setting ring time switch Playing your message Skipping a message Repeating a messageDeleting all messages Deleting a messageVoice memo Deleting individual messageRecording a conversation Command Function Remote access away from homeTurn on the answering machine remotely Remote room monitorAdditional Information To attach the beltclip To remove the beltclip Page When the charging terminals become dirty Battery replacement and handlingWhen slightly dirty When very dirtyAC Adapter Information Battery InformationSymptom Suggestion Troubleshooting Your NEW PhoneSymptom Suggestion W, X, Y, Z K, LPlease do not Return this Product to the Place of Purchase At Uniden, we’ll take care of youFor Purchasing a Uniden Phone