Uniden EXAI 985HS manual Remote access away from home, Command Function

During the remote operation, rC displays on the base.

You must enter a command within 15 seconds of entering command waiting mode or the answering system automatically hangs up and returns to standby.

The system will only playback messages for four minutes and then it returns to command waiting mode. To continue playing your message, press # then 2 again within 15 seconds

Remote access away from home

You can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, even to record a new outgoing message, and to monitor sounds in the room. Prior to accessing the system remotely, you must have selected a PIN code (refer to page 45).

1

2 While the answering machine is activated, press # and your PIN code.

3 The answering system announces the time and day and the number of messages stored in memory. Then the message playback automatically begins.

4 You may continue to listen to your message, or you may select a command from the following chart.

Command Function

#then 2 Playing your messages

#then 3 Skipping a message

#then 4 Deleting a message

#then 5 Stop message playback

#then 6 Answering system on

#then 7 Voice memo record/stop

#then 8 Outgoing message record/stop

#then 9 Answer system off

5 After all of your messages have played, or the playback time exceeds 4 minutes, you will hear intermittent tones indicating that the system is in the command waiting mode. You may enter another command at this time from the chart above.

6 When you are finished, hang up to exit the system. The answering system automatically returns to standby.

51