Uniden EXAI 985HS manual AC Adapter Information, Battery Information

Page 59

General Information

The EXAI 985HS complies with FCC Parts 15 and 68. Operating Temperature: 0ºC to +50ºC (+32ºF to +122ºF)

AC Adapter Information

AC Adapter part number:AD-420

Input Voltage:	120V AC 60Hz
Output Voltage:	9V DC 350 mA

Battery Information

Battery part number:	BT-905
Capacity:	600 mAH, 3.6V
Battery Use Time (per charge)
From fully charged:
Talk Mode duration	7	hours
Standby Mode duration 7		days

If the handset is left off of the base, the actual Talk Mode duration will be reduced respective to the amount of time the handset is off the base.

Recharge your phone on a regular basis by returning the handset to the base after each phone call. When the operating time becomes short, even after the battery is recharged, please replace the battery. With normal usage, the battery should last about one year.

Replacement batteries may be purchased at your local Uniden dealer or by contacting the Uniden Parts Department (800) 554-3988. Hours are from 7:00 a.m. to 5:00 p.m. Central Time, Monday through Friday.

We can also be reached on the web at www.uniden.com

57

Image 59

Contents

A I 9 8 5 H S Introduction to Your NEW Phone Page Page Basics Way Conference FeatureCaller ID Features Getting StartedHandset Base unitUniden Parts Department Choose the best location Connect the base unit If you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseStandard wall plate mounting Direct wall plate mounting Use only Uniden Battery BT-905 Do not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsExample To select Cidcw Page Dialing from standby Dialing from talk modeFrom the handset From the baseTo on When the phone is ringing When speaking with the baseWhen speaking with the handset Handset ringer switch Redialing from Standby Redialing from talk mode Intercom from the handset to base Intercom from the base to handsetTo transfer from the base to the handset To transfer from the handset to the baseOn the handset Memory DialingMemory03 Stored On the base If you press Display a Programmed Number From the base Memory Store is With the handset With the base When speaking on the base When speaking on the handsetCaller ID Talk Page Deleting a Caller ID message Deleting all Caller ID names/numbers When the pointer is at YesLong Distance calls and Area code Calling a party from the Caller ID listStoring Caller ID messages in Memory dialing Page Selecting an Option Integrated Turning the answering system on/off Setting the clockChoosing between two greetings Setting your greetingPreset Message Recording your personal greetingSelecting a PIN code Announce only featureSelecting the message record time Setting ring time switch Playing your message Skipping a message Repeating a messageDeleting all messages Deleting a messageVoice memo Deleting individual messageRecording a conversation Command Function Remote access away from homeTurn on the answering machine remotely Remote room monitor Additional Information To attach the beltclip To remove the beltclip Page When the charging terminals become dirty Battery replacement and handlingWhen slightly dirty When very dirtyAC Adapter Information Battery InformationSymptom Suggestion Troubleshooting Your NEW PhoneSymptom Suggestion W, X, Y, Z K, LPlease do not Return this Product to the Place of Purchase At Uniden, we’ll take care of youFor Purchasing a Uniden Phone