Uniden EXAI 985HS From the handset, From the base, Dialing from standby, Dialing from talk mode

Page 17

The base microphone is located under the phone. Position yourself as near to the base as possible and speak clearly.

BASICS

From the handset

Dialing from standby

1	Pick up the handset.
2	Dial the phone number.
3	Press	.
4	To hang up, press		or return the
	handset to the base.
Dialing from talk mode
1	Pick up the handset and press			.
2	Dial the phone number.
3	To hang up, press		or return the
	handset to the base.
From the base
1	Press	.
2	Dial the number on the keypad.
3	To finish the call, press			to
	hang up.
Other Operations
To	Do this
To improve reception	Press		during the
	conversation. “Scanning” appears
	on the display. If the operation
	fails, the error tone sounds.
To adjust the earpiece volume	Press	or	during the call.
To temporarily switch to tone dial Press			. The following
(When the base is set to pulse	numbers dialed will be sent as
mode)	tone dialing.
To enter a pause within the	Press		. “P” appears in the		15
dialing sequence.	display which represents a pause.				15
dialing sequence.	display which represents a pause.

Image 17

Contents A I 9 8 5 H S Introduction to Your NEW Phone Page Page Caller ID Features Way Conference FeatureGetting Started BasicsHandset Base unitUniden Parts Department Choose the best location Connect the base unit If your dialing system is Set the switch to Tone Choose the dialing modePulse If you arent sure of your dialing systemStandard wall plate mounting Direct wall plate mounting Use only Uniden Battery BT-905 When the battery charge becomes low Battery use time per chargeCleaning the battery contacts Do not use any liquids or solventsExample To select Cidcw Page From the handset Dialing from talk modeFrom the base Dialing from standbyTo on When the phone is ringing When speaking with the baseWhen speaking with the handset Handset ringer switch Redialing from Standby Redialing from talk mode Intercom from the handset to base Intercom from the base to handsetTo transfer from the base to the handset To transfer from the handset to the baseOn the handset Memory DialingMemory03 Stored On the base If you press Display a Programmed Number From the base Memory Store is With the handset With the base When speaking on the base When speaking on the handsetCaller ID Talk Page Deleting a Caller ID message Deleting all Caller ID names/numbers When the pointer is at YesLong Distance calls and Area code Calling a party from the Caller ID listStoring Caller ID messages in Memory dialing Page Selecting an Option Integrated Turning the answering system on/off Setting the clockPreset Message Setting your greetingRecording your personal greeting Choosing between two greetingsSelecting a PIN code Announce only featureSelecting the message record time Setting ring time switch Playing your message Skipping a message Repeating a messageVoice memo Deleting a messageDeleting individual message Deleting all messagesRecording a conversation Command Function Remote access away from homeTurn on the answering machine remotely Remote room monitorAdditional Information To attach the beltclip To remove the beltclip Page When slightly dirty Battery replacement and handlingWhen very dirty When the charging terminals become dirtyAC Adapter Information Battery InformationSymptom Suggestion Troubleshooting Your NEW PhoneSymptom Suggestion W, X, Y, Z K, LPlease do not Return this Product to the Place of Purchase At Uniden, we’ll take care of youFor Purchasing a Uniden Phone