Uniden EXAI 985HS manual Turning the answering system on/off, Setting the clock

Page 45

When the answering system is full, FL displays on the base and the system announces

“No Remaining Time”. You should delete some messages so that the system can record new messages.

Press and hold

or to quickly scroll through the numbers on the display.

If you don't complete the clock settting within two minutes, the system returns to standby.

Turning the answering system on/off

1 To turn the answering system on,

press . The current greeting message is played and a tone sounds.

2 To turn the answering system off,

press again.

Setting the clock

The clock on EXAI 985HS Answering System starts when power is applied to the base. Follow these steps to set the clock to the correct time.

1 Press and hold until a tone sounds.

2 First, press or until the correct day of the week is announced. (Numbers 0 through 6 displays on the base as each day is

announced.) Press again to select the day.

3 Next, press or until you hear the correct hour setting. Numbers 1 through 12 display on the base as each hour is announced.

Press again to select the correct time.

4 Press or until you hear the correct time setting. Numbers 1 through 59 display on the base as each minute

is announced. Press again to select the correct time.

5 The LED displays an A or P. Press or until you hear the correct AM/PM setting.

6 Press again to end the time/day setting.

The EXAI 985HS announces the time that you have set.

43

Image 45

Contents A I 9 8 5 H S Introduction to Your NEW Phone Page Page Caller ID Features Way Conference FeatureGetting Started BasicsHandset Base unitUniden Parts Department Choose the best location Connect the base unit If your dialing system is Set the switch to Tone Choose the dialing modePulse If you arent sure of your dialing systemStandard wall plate mounting Direct wall plate mounting Use only Uniden Battery BT-905 When the battery charge becomes low Battery use time per chargeCleaning the battery contacts Do not use any liquids or solventsExample To select Cidcw Page From the handset Dialing from talk modeFrom the base Dialing from standbyTo on When speaking with the base When speaking with the handsetWhen the phone is ringing Handset ringer switch Redialing from Standby Redialing from talk mode Intercom from the handset to base Intercom from the base to handsetTo transfer from the base to the handset To transfer from the handset to the baseOn the handset Memory DialingMemory03 Stored On the base If you press Display a Programmed Number From the base Memory Store is With the handset With the base When speaking on the base When speaking on the handsetCaller ID Talk Page Deleting a Caller ID message Deleting all Caller ID names/numbers When the pointer is at YesLong Distance calls and Area code Calling a party from the Caller ID listStoring Caller ID messages in Memory dialing Page Selecting an Option Integrated Turning the answering system on/off Setting the clockPreset Message Setting your greetingRecording your personal greeting Choosing between two greetingsAnnounce only feature Selecting the message record timeSelecting a PIN code Setting ring time switch Playing your message Skipping a message Repeating a messageVoice memo Deleting a messageDeleting individual message Deleting all messagesRecording a conversation Command Function Remote access away from homeTurn on the answering machine remotely Remote room monitorAdditional Information To attach the beltclip To remove the beltclip Page When slightly dirty Battery replacement and handlingWhen very dirty When the charging terminals become dirtyAC Adapter Information Battery InformationSymptom Suggestion Troubleshooting Your NEW PhoneSymptom Suggestion W, X, Y, Z K, LPlease do not Return this Product to the Place of Purchase At Uniden, we’ll take care of youFor Purchasing a Uniden Phone