Uniden EXAI 985HS manual Battery replacement and handling, When slightly dirty, When very dirty

Page 58

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year. Please contact your place of purchase or the Uniden Parts Department for a replacement battery. (See page 5)

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

RECYCLING NICKEL- CADMIUM BATTERIES

NICKEL-

CADMIUM

BATTERIES

MUST BE

DISPOSED OF

PROPERLY.

Nickel-cadmium cells are used in the battery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel- cadmium batteries.

Caution

•Use the specified battery pack.

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery casing.

56

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with mild dishwashing detergent.

Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a dry cloth or a pencil eraser, if necessary.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

Image 58

Contents

A I 9 8 5 H S Introduction to Your NEW Phone Page Page Getting Started Way Conference FeatureCaller ID Features BasicsBase unit HandsetUniden Parts Department Choose the best location Connect the base unit Pulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing systemStandard wall plate mounting Direct wall plate mounting Use only Uniden Battery BT-905 Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solventsExample To select Cidcw Page From the base Dialing from talk modeFrom the handset Dialing from standbyTo on When speaking with the handset When speaking with the baseWhen the phone is ringing Handset ringer switch Redialing from Standby Redialing from talk mode Intercom from the base to handset Intercom from the handset to baseTo transfer from the handset to the base To transfer from the base to the handsetMemory Dialing On the handsetMemory03 Stored On the base If you press Display a Programmed Number From the base Memory Store is With the handset With the base When speaking on the handset When speaking on the baseCaller ID Talk Page Deleting a Caller ID message When the pointer is at Yes Deleting all Caller ID names/numbersCalling a party from the Caller ID list Long Distance calls and Area codeStoring Caller ID messages in Memory dialing Page Selecting an Option Integrated Setting the clock Turning the answering system on/offRecording your personal greeting Setting your greetingPreset Message Choosing between two greetingsSelecting the message record time Announce only featureSelecting a PIN code Setting ring time switch Playing your message Repeating a message Skipping a messageDeleting individual message Deleting a messageVoice memo Deleting all messagesRecording a conversation Remote access away from home Command Function Remote room monitor Turn on the answering machine remotelyAdditional Information To attach the beltclip To remove the beltclip Page When very dirty Battery replacement and handlingWhen slightly dirty When the charging terminals become dirtyBattery Information AC Adapter InformationTroubleshooting Your NEW Phone Symptom SuggestionSymptom Suggestion K, L W, X, Y, ZAt Uniden, we’ll take care of you Please do not Return this Product to the Place of PurchaseFor Purchasing a Uniden Phone