Uniden EXAI 985HS manual Choose the best location

Page 8

6

Do the following steps.

•Choose the best location

•Connect the base unit

•Choose the dialing mode

Choose the best location

Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important guidelines you should consider:

	Avoid heat sources, such as	Avoid noise sources such as a window
	radiators, air ducts, and sunlight	by a street with heavy traffic
	Avoid television sets	Avoid microwave ovens
	Avoid television sets	Avoid excessive
	and other electronic	Avoid excessive
	equipment	moisture, extremely low
		temperatures, dust,
		mechanical vibration, or
		shock

Avoid personal

computers

Choose a central location

Avoid other cordless telephones

•After installing the battery pack in the handset, charge your handset for 12-15 hours before plugging the phone into the phone line. Once the handset battery pack is fully charged, then connect the telephone line cord to the base and telephone wall outlet.

•The location should be close to both a phone jack and a continuous power outlet which is not switchable.

•Keep the base and handset away from sources of electrical noise such as motors, microwave ovens, and fluorescent lighting.

•Be sure there is sufficient space to raise the base antenna fully vertical.

•The base can be placed on a desk, tabletop, or mounted on a standard wall plate.

Image 8

Contents A I 9 8 5 H S Introduction to Your NEW Phone Page Page Way Conference Feature Caller ID FeaturesGetting Started BasicsBase unit HandsetUniden Parts Department Choose the best location Connect the base unit Choose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemStandard wall plate mounting Direct wall plate mounting Use only Uniden Battery BT-905 Battery use time per charge When the battery charge becomes lowCleaning the battery contacts Do not use any liquids or solventsExample To select Cidcw Page Dialing from talk mode From the handsetFrom the base Dialing from standbyTo on When the phone is ringing When speaking with the baseWhen speaking with the handset Handset ringer switch Redialing from Standby Redialing from talk mode Intercom from the base to handset Intercom from the handset to baseTo transfer from the handset to the base To transfer from the base to the handsetMemory Dialing On the handsetMemory03 Stored On the base If you press Display a Programmed Number From the base Memory Store is With the handset With the base When speaking on the handset When speaking on the baseCaller ID Talk Page Deleting a Caller ID message When the pointer is at Yes Deleting all Caller ID names/numbersCalling a party from the Caller ID list Long Distance calls and Area codeStoring Caller ID messages in Memory dialing Page Selecting an Option Integrated Setting the clock Turning the answering system on/offSetting your greeting Preset MessageRecording your personal greeting Choosing between two greetingsSelecting a PIN code Announce only featureSelecting the message record time Setting ring time switch Playing your message Repeating a message Skipping a messageDeleting a message Voice memoDeleting individual message Deleting all messagesRecording a conversation Remote access away from home Command FunctionRemote room monitor Turn on the answering machine remotelyAdditional Information To attach the beltclip To remove the beltclip Page Battery replacement and handling When slightly dirtyWhen very dirty When the charging terminals become dirtyBattery Information AC Adapter InformationTroubleshooting Your NEW Phone Symptom SuggestionSymptom Suggestion K, L W, X, Y, ZAt Uniden, we’ll take care of you Please do not Return this Product to the Place of PurchaseFor Purchasing a Uniden Phone