Uniden EXAI 985HS manual Memory03 Stored

Page 26

24

4 Use the , , , , or

keys to enter the name. The name cannot exceed 13 characters.

Use the and key to scroll through the character menu. It contains upper and lower case letters and various characters.

Use the and keys to move the cursor to the desired location.

Use the key to delete characters as needed.

5 Press .

Store Number” is displayed. The cursor flashes indicating that the display is

ready for the number to be entered.

6 Use the number keypad to enter the phone number. The phone number cannot exceed 20 digits.

Use the key to enter pause in the dialing sequence. The display shows a “P”. Each pause counts as one digit and represents a two second delay in time between digits.

The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits.

Use the key to delete digits as needed.

7 Press .

The handset beeps and displays the confirmation screen. Memory storage is complete.

For example, if you store a name and number into memory location number 03, the display shows

Memory03 Stored.

After about 2 seconds, “Memory Store” is displayed.

8 Press to return to standby mode.

Image 26
Contents A I 9 8 5 H S Introduction to Your NEW Phone Page Page Getting Started Way Conference FeatureCaller ID Features BasicsBase unit HandsetUniden Parts Department Choose the best location Connect the base unit Pulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing systemStandard wall plate mounting Direct wall plate mounting Use only Uniden Battery BT-905 Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solventsExample To select Cidcw Page From the base Dialing from talk modeFrom the handset Dialing from standbyTo on When the phone is ringing When speaking with the baseWhen speaking with the handset Handset ringer switch Redialing from Standby Redialing from talk mode Intercom from the base to handset Intercom from the handset to baseTo transfer from the handset to the base To transfer from the base to the handsetMemory Dialing On the handsetMemory03 Stored On the base If you press Display a Programmed Number From the base Memory Store is With the handset With the base When speaking on the handset When speaking on the baseCaller ID Talk Page Deleting a Caller ID message When the pointer is at Yes Deleting all Caller ID names/numbersCalling a party from the Caller ID list Long Distance calls and Area codeStoring Caller ID messages in Memory dialing Page Selecting an Option Integrated Setting the clock Turning the answering system on/offRecording your personal greeting Setting your greetingPreset Message Choosing between two greetingsSelecting a PIN code Announce only featureSelecting the message record time Setting ring time switch Playing your message Repeating a message Skipping a messageDeleting individual message Deleting a messageVoice memo Deleting all messagesRecording a conversation Remote access away from home Command FunctionRemote room monitor Turn on the answering machine remotelyAdditional Information To attach the beltclip To remove the beltclip Page When very dirty Battery replacement and handlingWhen slightly dirty When the charging terminals become dirtyBattery Information AC Adapter InformationTroubleshooting Your NEW Phone Symptom SuggestionSymptom Suggestion K, L W, X, Y, ZAt Uniden, we’ll take care of you Please do not Return this Product to the Place of PurchaseFor Purchasing a Uniden Phone