Uniden EXS 9660 manual

Page 10

8

1. Insert two mounting screws (with the appropriate anchoring device) into the wall

3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screw heads for mounting the phone.

2. Snap the desktop/wall mount adapter into the bottom of the base as shown.

3. Plug the AC adapter cord into the

10V DC input jack on the back of the base.

4. Put the AC adapter cord inside the molded wiring channel. Wrap it around the strain relief notch. Plug the AC adapter into a standard 120V AC wall outlet.

5. Plug one end of the long telephone cord into the TEL LINE 1/2 jack on the back of the base. Plug the other end into a telephone jack.

Image 10

Contents R E a D Spectrum Controls and Functions Contents Features WelcomeIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Wall Installation Standard wall plate mountingDirect wall mounting Page Page Installing the Handset Battery Pack Initial battery charging Charging the Battery PackCharging optional battery packs Low battery indicator Cleaning the Battery ContactsSetting the PULSE/TONE Switch To avoid Memory EffectHandset earpiece volume Adjusting the Volume ControlsHandset ringer volume Base ringer volumeTo remove the beltclip Installing the BeltclipTo attach the beltclip Pull back on the release tab. Lift the beltclip upRestore power to the base Place the handset on the base Headset InstallationTo reset the digital security code Automatic Digital Code SecurityMaking and Receiving Calls Basic 2-line operationAnswering a Call from the Base Making a Call from the Handset Making a Call from the BaseOff-Hook Dialing Flash and Call Waiting Using the Tone FeatureOn-Hook Dialing To redial from the handset Using RedialPlacing a Call on Hold Press line 1, then press redial/pYou can hear the party on line 1, but they cannot hear you Using the Mute FeatureUsing the page Feature Handset beeps for 60 seconds Following screen appearsLine Operation Extension In UseWAY Conferencing Press int’com on the handset to answer Press page/int’com on the base Using Your EXS 9660 IntercomFrom the Base to the Handset Speak within 12 inches of the base microphoneAnswer at the base by pressing Transferring a CallFrom Handset to Base Call with the intercom On the base, press line 1 to talkTraveling OUT-OF-RANGE Del key deletes characters as the cursor moves left On the HandsetKeys to move right or left or to create a blank space Display is ready for a number to be enteredOn the Base To edit a number you have stored in the handset Use the and keys to move the cursor left and rightPress del to remove an unwanted character From the Handset Erasing a Number from MemoryAfter erasing a number, you may add a new address to memory Press select Following screen appearsFrom the Base On-Hook Dialing from the Handset Using Memory DialingPress line 1. The number dials Press line 1. The line 1 LED lights Off-Hook Dialing from the HandsetDialing from the Base Number dialsSetting up Caller ID options Using Caller IDTurning AutoTalk and Caller ID/Call Waiting On or Off Press the select key to toggle between On and Off If you want to set CIDCW, useKeys to move the cursor Programming Your Area CodePress select Press to scan through Name/numbers Reviewing Caller ID name/numbersUse or to select line With the date, time, call countSelect the name/number that you would like to dial Storing a Caller ID number in a memory location Press memory to store the selected messageDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Quick Reference Chart Base Unit GeneralHandset At Uniden, we’ll take care of you Thank YOU