Uniden EXS 9660 manual Answering a Call from the Base

Page 19

MAKING AND RECEIVING CALLS

You must have a 2-line subscription from your phone company to use the 2-line features.

When you have connected power and a telephone line to your EXS 9660, the phone is in “Standby mode,” ready to receive and make calls.

For clarity, the instructions in this Owner’s Manual designates line 1 unless the procedure requires using line 2. The same instructions apply to line 2.

You may cancel an operation while using your phone by pressing exit.

ANSWERING A CALL FROM THE BASE

1. The base rings. The corresponding line 1 LED on the base flashes.

2. Press the line 1 button and speak.

The base microphone is located under the phone. Position yourself approximately 12 inches away from the base and speak clearly.

3. When you finish the call, press line 1 to hang up.

17

Image 19

Contents R E a D Spectrum Controls and Functions Contents Welcome FeaturesIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Standard wall plate mounting Wall InstallationDirect wall mounting Page Page Installing the Handset Battery Pack Initial battery charging Charging the Battery PackCharging optional battery packs To avoid Memory Effect Cleaning the Battery ContactsSetting the PULSE/TONE Switch Low battery indicatorBase ringer volume Adjusting the Volume ControlsHandset ringer volume Handset earpiece volumePull back on the release tab. Lift the beltclip up Installing the BeltclipTo attach the beltclip To remove the beltclipAutomatic Digital Code Security Headset InstallationTo reset the digital security code Restore power to the base Place the handset on the baseBasic 2-line operation Making and Receiving CallsAnswering a Call from the Base Making a Call from the Handset Making a Call from the BaseOff-Hook Dialing Flash and Call Waiting Using the Tone FeatureOn-Hook Dialing Press line 1, then press redial/p Using RedialPlacing a Call on Hold To redial from the handsetHandset beeps for 60 seconds Following screen appears Using the Mute FeatureUsing the page Feature You can hear the party on line 1, but they cannot hear youExtension In Use Line OperationWAY Conferencing Press int’com on the handset to answer Speak within 12 inches of the base microphone Using Your EXS 9660 IntercomFrom the Base to the Handset Press page/int’com on the baseCall with the intercom On the base, press line 1 to talk Transferring a CallFrom Handset to Base Answer at the base by pressingTraveling OUT-OF-RANGE Display is ready for a number to be entered On the HandsetKeys to move right or left or to create a blank space Del key deletes characters as the cursor moves leftOn the Base Use the and keys to move the cursor left and right To edit a number you have stored in the handsetPress del to remove an unwanted character Press select Following screen appears Erasing a Number from MemoryAfter erasing a number, you may add a new address to memory From the HandsetFrom the Base On-Hook Dialing from the Handset Using Memory DialingPress line 1. The number dials Number dials Off-Hook Dialing from the HandsetDialing from the Base Press line 1. The line 1 LED lightsSetting up Caller ID options Using Caller IDTurning AutoTalk and Caller ID/Call Waiting On or Off Programming Your Area Code If you want to set CIDCW, useKeys to move the cursor Press the select key to toggle between On and OffWith the date, time, call count Reviewing Caller ID name/numbersUse or to select line Press select Press to scan through Name/numbersSelect the name/number that you would like to dial Press memory to store the selected message Storing a Caller ID number in a memory locationDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Quick Reference Chart Base Unit GeneralHandset At Uniden, we’ll take care of you Thank YOU