Uniden EXS 9660 manual Installing the Beltclip, To attach the beltclip, To remove the beltclip

Page 16

INSTALLING THE BELTCLIP

▼To attach the beltclip

1.Remove the slot cover.

2.Insert the beltclip into the empty slot. Press down until it clicks.

▼To remove the beltclip

1.Pull back on the release tab. Lift the beltclip up.

2.Replace the slot cover. You can store either the beltclip,

or the slot cover, in the bottom of the base.

Image 16

Contents R E a D Spectrum Controls and Functions Contents Features WelcomeIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Wall Installation Standard wall plate mountingDirect wall mounting Page Page Installing the Handset Battery Pack Initial battery charging Charging the Battery PackCharging optional battery packs Cleaning the Battery Contacts Setting the PULSE/TONE SwitchLow battery indicator To avoid Memory EffectAdjusting the Volume Controls Handset ringer volumeHandset earpiece volume Base ringer volumeInstalling the Beltclip To attach the beltclipTo remove the beltclip Pull back on the release tab. Lift the beltclip upHeadset Installation To reset the digital security codeRestore power to the base Place the handset on the base Automatic Digital Code SecurityMaking and Receiving Calls Basic 2-line operationAnswering a Call from the Base Making a Call from the Handset Making a Call from the BaseOff-Hook Dialing Flash and Call Waiting Using the Tone FeatureOn-Hook Dialing Using Redial Placing a Call on HoldTo redial from the handset Press line 1, then press redial/pUsing the Mute Feature Using the page FeatureYou can hear the party on line 1, but they cannot hear you Handset beeps for 60 seconds Following screen appearsLine Operation Extension In UseWAY Conferencing Press int’com on the handset to answer Using Your EXS 9660 Intercom From the Base to the HandsetPress page/int’com on the base Speak within 12 inches of the base microphoneTransferring a Call From Handset to BaseAnswer at the base by pressing Call with the intercom On the base, press line 1 to talkTraveling OUT-OF-RANGE On the Handset Keys to move right or left or to create a blank spaceDel key deletes characters as the cursor moves left Display is ready for a number to be enteredOn the Base To edit a number you have stored in the handset Use the and keys to move the cursor left and rightPress del to remove an unwanted character Erasing a Number from Memory After erasing a number, you may add a new address to memoryFrom the Handset Press select Following screen appearsFrom the Base On-Hook Dialing from the Handset Using Memory DialingPress line 1. The number dials Off-Hook Dialing from the Handset Dialing from the BasePress line 1. The line 1 LED lights Number dialsSetting up Caller ID options Using Caller IDTurning AutoTalk and Caller ID/Call Waiting On or Off If you want to set CIDCW, use Keys to move the cursorPress the select key to toggle between On and Off Programming Your Area CodeReviewing Caller ID name/numbers Use or to select linePress select Press to scan through Name/numbers With the date, time, call countSelect the name/number that you would like to dial Storing a Caller ID number in a memory location Press memory to store the selected messageDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Quick Reference Chart Base Unit GeneralHandset At Uniden, we’ll take care of you Thank YOU