Uniden EXS 9660 manual On the Base

Page 31

7.Enter the phone number with the number keypad (direct entry). Use the < and > keys to position the cursor.

When entering name/numbers, you may press pause to enter a pause in the dialing sequence. The display shows a P. The pause feature is useful for long distance calling, credit card dialing, or any other dialing sequence requiring a pause between digits.

8.	When you have finished entering
	a name/number, press select.
	The handset beeps and and displays
	a confirmation screen.	Memory 01 Stored
▼ On the Base
1. Press memory. The status
	LED blinks.
2.	Dial the number you wish
	to store.
3.	Press memory. Enter the memory
	location number (0-9) on the keypad.
	The status LED stops flashing. A
	confirmation beep indicates the number
	is stored.

29

Image 31

Contents R E a D Spectrum Controls and Functions Contents Welcome FeaturesIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Standard wall plate mounting Wall InstallationDirect wall mounting Page Page Installing the Handset Battery Pack Initial battery charging Charging the Battery PackCharging optional battery packs To avoid Memory Effect Cleaning the Battery ContactsSetting the PULSE/TONE Switch Low battery indicatorBase ringer volume Adjusting the Volume ControlsHandset ringer volume Handset earpiece volumePull back on the release tab. Lift the beltclip up Installing the BeltclipTo attach the beltclip To remove the beltclipAutomatic Digital Code Security Headset InstallationTo reset the digital security code Restore power to the base Place the handset on the baseBasic 2-line operation Making and Receiving CallsAnswering a Call from the Base Making a Call from the Handset Making a Call from the BaseOff-Hook Dialing Flash and Call Waiting Using the Tone FeatureOn-Hook Dialing Press line 1, then press redial/p Using RedialPlacing a Call on Hold To redial from the handsetHandset beeps for 60 seconds Following screen appears Using the Mute FeatureUsing the page Feature You can hear the party on line 1, but they cannot hear youExtension In Use Line OperationWAY Conferencing Press int’com on the handset to answer Speak within 12 inches of the base microphone Using Your EXS 9660 IntercomFrom the Base to the Handset Press page/int’com on the base Call with the intercom On the base, press line 1 to talk Transferring a Call From Handset to Base Answer at the base by pressingTraveling OUT-OF-RANGE Display is ready for a number to be entered On the HandsetKeys to move right or left or to create a blank space Del key deletes characters as the cursor moves leftOn the Base Use the and keys to move the cursor left and right To edit a number you have stored in the handsetPress del to remove an unwanted character Press select Following screen appears Erasing a Number from MemoryAfter erasing a number, you may add a new address to memory From the HandsetFrom the Base On-Hook Dialing from the Handset Using Memory DialingPress line 1. The number dials Number dials Off-Hook Dialing from the HandsetDialing from the Base Press line 1. The line 1 LED lightsSetting up Caller ID options Using Caller IDTurning AutoTalk and Caller ID/Call Waiting On or Off Programming Your Area Code If you want to set CIDCW, useKeys to move the cursor Press the select key to toggle between On and OffWith the date, time, call count Reviewing Caller ID name/numbersUse or to select line Press select Press to scan through Name/numbersSelect the name/number that you would like to dial Press memory to store the selected message Storing a Caller ID number in a memory locationDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Quick Reference Chart Base Unit GeneralHandset At Uniden, we’ll take care of you Thank YOU