Uniden EXS 9660 manual Charging the Battery Pack, Initial battery charging

Page 13

Please visit your authorized Uniden dealer to obtain an extra battery pack or contact the Uniden Parts Department at (800) 554-3988. Hours are from 8:30 a.m. to 5:00 p.m. Central Standard Time, Monday through Friday.

CHARGING THE BATTERY PACK

▼Initial battery charging

Before connecting your phone for the first time, charge the rechargeable battery pack for 15-20 hours without interruption.

1. Place the handset on the base.

2. Make sure that status LED lights.

If the LED doesn’t light, be sure the AC adapter is plugged in and the handset makes good contact with the base charging contacts.

▼Charging optional battery packs

The base of your phone is equipped with a compartment for charging an extra battery pack for use in your handset. You can obtain an extra battery pack from your authorized Uniden dealer.

1.Position the battery pack so the contacts are face up.

2.Slide the battery pack into

the charging compartment until

it locks into place.

3.Charge the battery for 24 hours. When charging is complete, lift the latch to remove the battery pack. To install the charged battery into the handset, see INSTALLING THE HANDSET BATTERY PACK, page 10.

In the event of a power failure, your spare battery pack temporarily provides power for the base so you can still use your phone.

11

Image 13

Contents R E a D Spectrum Controls and Functions Contents Welcome FeaturesIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Standard wall plate mounting Wall InstallationDirect wall mounting Page Page Installing the Handset Battery Pack Initial battery charging Charging the Battery PackCharging optional battery packs Setting the PULSE/TONE Switch Cleaning the Battery ContactsLow battery indicator To avoid Memory EffectHandset ringer volume Adjusting the Volume ControlsHandset earpiece volume Base ringer volumeTo attach the beltclip Installing the BeltclipTo remove the beltclip Pull back on the release tab. Lift the beltclip upTo reset the digital security code Headset InstallationRestore power to the base Place the handset on the base Automatic Digital Code SecurityBasic 2-line operation Making and Receiving CallsAnswering a Call from the Base Making a Call from the Handset Making a Call from the BaseOff-Hook Dialing Flash and Call Waiting Using the Tone FeatureOn-Hook Dialing Placing a Call on Hold Using RedialTo redial from the handset Press line 1, then press redial/pUsing the page Feature Using the Mute FeatureYou can hear the party on line 1, but they cannot hear you Handset beeps for 60 seconds Following screen appearsExtension In Use Line OperationWAY Conferencing Press int’com on the handset to answer From the Base to the Handset Using Your EXS 9660 IntercomPress page/int’com on the base Speak within 12 inches of the base microphoneFrom Handset to Base Transferring a CallAnswer at the base by pressing Call with the intercom On the base, press line 1 to talkTraveling OUT-OF-RANGE Keys to move right or left or to create a blank space On the HandsetDel key deletes characters as the cursor moves left Display is ready for a number to be enteredOn the Base Use the and keys to move the cursor left and right To edit a number you have stored in the handsetPress del to remove an unwanted character After erasing a number, you may add a new address to memory Erasing a Number from MemoryFrom the Handset Press select Following screen appearsFrom the Base On-Hook Dialing from the Handset Using Memory DialingPress line 1. The number dials Dialing from the Base Off-Hook Dialing from the HandsetPress line 1. The line 1 LED lights Number dialsSetting up Caller ID options Using Caller IDTurning AutoTalk and Caller ID/Call Waiting On or Off Keys to move the cursor If you want to set CIDCW, usePress the select key to toggle between On and Off Programming Your Area CodeUse or to select line Reviewing Caller ID name/numbersPress select Press to scan through Name/numbers With the date, time, call countSelect the name/number that you would like to dial Press memory to store the selected message Storing a Caller ID number in a memory locationDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Quick Reference Chart Base Unit GeneralHandset At Uniden, we’ll take care of you Thank YOU