Uniden EXS 9660 manual Using the Tone Feature, Flash and Call Waiting, On-Hook Dialing

Page 21

You may enter a pause in the dialing sequence during On-Hook dialing. You may not enter a pause in the dialing sequence during Off- Hook dialing.

The tone feature applies only when the base is set to pulse.

The flash feature does not function when line 1 and line 2 are on a conference call. (See the 3-WAY CONFERENC- ING and 4-WAY CONFERENCING, pages 23 and 24.)

▼On-Hook Dialing

1.Pick up the handset.

2.Dial the number on the keypad, or use one of the memory features. (See USING MEMORY DIALING, page 34).

3.Press line 1.

4.When you finish the call, press line 1, or return the handset to the base.

USING THE TONE FEATURE

If you are dialing in the pulse mode

and need to enter tone digits, press tone then enter the digits. Once the call has ended, tone mode is canceled and pulse dialing resumes.

FLASH AND CALL WAITING

If you have Call Waiting service and a call waiting tone sounds, press flash to accept the call. After a short pause you will hear the new caller. To return to the original caller, press flash again. The flash function on the base and handset are independent of each other. You can use your flash feature from either the handset or the base.

19

Image 21

Contents R E a D Spectrum Controls and Functions Contents Welcome FeaturesIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Standard wall plate mounting Wall InstallationDirect wall mounting Page Page Installing the Handset Battery Pack Charging the Battery Pack Initial battery chargingCharging optional battery packs Setting the PULSE/TONE Switch Cleaning the Battery ContactsLow battery indicator To avoid Memory EffectHandset ringer volume Adjusting the Volume ControlsHandset earpiece volume Base ringer volumeTo attach the beltclip Installing the BeltclipTo remove the beltclip Pull back on the release tab. Lift the beltclip upTo reset the digital security code Headset InstallationRestore power to the base Place the handset on the base Automatic Digital Code Security Basic 2-line operation Making and Receiving CallsAnswering a Call from the Base Making a Call from the Base Making a Call from the HandsetOff-Hook Dialing Using the Tone Feature Flash and Call WaitingOn-Hook Dialing Placing a Call on Hold Using RedialTo redial from the handset Press line 1, then press redial/pUsing the page Feature Using the Mute FeatureYou can hear the party on line 1, but they cannot hear you Handset beeps for 60 seconds Following screen appearsExtension In Use Line OperationWAY Conferencing Press int’com on the handset to answer From the Base to the Handset Using Your EXS 9660 IntercomPress page/int’com on the base Speak within 12 inches of the base microphoneFrom Handset to Base Transferring a CallAnswer at the base by pressing Call with the intercom On the base, press line 1 to talkTraveling OUT-OF-RANGE Keys to move right or left or to create a blank space On the HandsetDel key deletes characters as the cursor moves left Display is ready for a number to be enteredOn the Base Use the and keys to move the cursor left and right To edit a number you have stored in the handsetPress del to remove an unwanted character After erasing a number, you may add a new address to memory Erasing a Number from MemoryFrom the Handset Press select Following screen appearsFrom the Base Using Memory Dialing On-Hook Dialing from the HandsetPress line 1. The number dials Dialing from the Base Off-Hook Dialing from the HandsetPress line 1. The line 1 LED lights Number dialsUsing Caller ID Setting up Caller ID optionsTurning AutoTalk and Caller ID/Call Waiting On or Off Keys to move the cursor If you want to set CIDCW, usePress the select key to toggle between On and Off Programming Your Area CodeUse or to select line Reviewing Caller ID name/numbersPress select Press to scan through Name/numbers With the date, time, call countSelect the name/number that you would like to dial Press memory to store the selected message Storing a Caller ID number in a memory locationDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Quick Reference Chart General Base UnitHandset At Uniden, we’ll take care of you Thank YOU