Uniden EXS 9660 manual DESK/TABLETOP Installation

Page 7

Before using your phone, charge the Nickel- Cadmium battery pack for 15-20 hours.

Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

Use only the Uniden AC adapter supplied with this phone. DO NOT use an outlet controlled by a wall switch.

DESK/TABLETOP INSTALLATION

1. Snap the desktop/wall mount adapter into the top of the base as shown.

2. Plug the AC adapter cord into the 10V DC input jack on the back of the base.

3. Wrap the AC adapter cord around the strain relief notch.

4.Plug the AC adapter into a standard 120V AC wall outlet.

5.Charge the battery (refer to CHARGING THE BATTERY PACK, page 11).

6.Plug one end of the long telephone cord into the TEL LINE 1/2 jack on the back of the base.

7.Plug the other end of the cord into the telephone jack on the wall.

8.Set the base on a desk or tabletop. Place the handset on the base with the

keypad either facing up or down. Raise the antenna to a vertical position.

5

Image 7

Contents R E a D Spectrum Controls and Functions Contents Welcome FeaturesIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Standard wall plate mounting Wall InstallationDirect wall mounting Page Page Installing the Handset Battery Pack Initial battery charging Charging the Battery PackCharging optional battery packs To avoid Memory Effect Cleaning the Battery ContactsSetting the PULSE/TONE Switch Low battery indicatorBase ringer volume Adjusting the Volume ControlsHandset ringer volume Handset earpiece volumePull back on the release tab. Lift the beltclip up Installing the BeltclipTo attach the beltclip To remove the beltclipAutomatic Digital Code Security Headset InstallationTo reset the digital security code Restore power to the base Place the handset on the baseBasic 2-line operation Making and Receiving CallsAnswering a Call from the Base Making a Call from the Handset Making a Call from the BaseOff-Hook Dialing Flash and Call Waiting Using the Tone FeatureOn-Hook Dialing Press line 1, then press redial/p Using RedialPlacing a Call on Hold To redial from the handsetHandset beeps for 60 seconds Following screen appears Using the Mute FeatureUsing the page Feature You can hear the party on line 1, but they cannot hear youExtension In Use Line OperationWAY Conferencing Press int’com on the handset to answer Speak within 12 inches of the base microphone Using Your EXS 9660 IntercomFrom the Base to the Handset Press page/int’com on the baseCall with the intercom On the base, press line 1 to talk Transferring a CallFrom Handset to Base Answer at the base by pressingTraveling OUT-OF-RANGE Display is ready for a number to be entered On the HandsetKeys to move right or left or to create a blank space Del key deletes characters as the cursor moves leftOn the Base Use the and keys to move the cursor left and right To edit a number you have stored in the handsetPress del to remove an unwanted character Press select Following screen appears Erasing a Number from MemoryAfter erasing a number, you may add a new address to memory From the HandsetFrom the Base On-Hook Dialing from the Handset Using Memory DialingPress line 1. The number dials Number dials Off-Hook Dialing from the HandsetDialing from the Base Press line 1. The line 1 LED lightsSetting up Caller ID options Using Caller IDTurning AutoTalk and Caller ID/Call Waiting On or Off Programming Your Area Code If you want to set CIDCW, useKeys to move the cursor Press the select key to toggle between On and OffWith the date, time, call count Reviewing Caller ID name/numbersUse or to select line Press select Press to scan through Name/numbersSelect the name/number that you would like to dial Press memory to store the selected message Storing a Caller ID number in a memory locationDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Quick Reference Chart Base Unit GeneralHandset At Uniden, we’ll take care of you Thank YOU