Uniden EXS 9660 If you want to set CIDCW, use, Keys to move the cursor, Screening your calls

Page 39

Line 1 Smith John 817-555-1212

	4. If you want to set CIDCW, use
	4. If you want to set CIDCW, use	1>Auto Talk:Off
	the ▲ and ▼ keys to move the cursor	1>Auto Talk:Off
	the ▲ and ▼ keys to move the cursor	2 CIDCW	:On
	to 2 CIDCW.	3 Area Code:

Press the select key to toggle between On and Off.

If you have no Caller ID name/numbers, then the total is shown as 00.

▼Programming Your Area Code

1.Press and hold caller id for two seconds. The following screen appears:

Caller ID Setup 1>Line 1

2 Line 2

If your have no New Caller ID name/numbers. “00” displays.

2.Use the ▲ and ▼ keys to select line 1 or line 2.

The following screen appears:

3.Use the ▲ and ▼ keys to move the cursor to select 3 Area Code:

Press select. Use the number keypad to enter or change the area code. Press select again.

1>Auto Talk:Off

2 CIDCW :On

3 Area Code:

Once a Caller ID message has been viewed, it is no longer considered a new message.

4. After you have made your selections, press caller id to return to Caller ID setup screen. Or, press exit to return to standby.

▼ Screening your calls

Caller ID allows you to review caller information before answering your phone. At the beginning of the second ring, the display shows the line number

that is being used, name, and phone number of the caller. If your Caller ID service is number only, the name does not appear

on the second line.

If a name or number is not available, the display shows a message such as Incomplete Data, Private Number, Private Name, etc.

37

Image 39

Contents R E a D Spectrum Controls and Functions Contents Welcome FeaturesIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Standard wall plate mounting Wall InstallationDirect wall mounting Page Page Installing the Handset Battery Pack Charging the Battery Pack Initial battery chargingCharging optional battery packs To avoid Memory Effect Cleaning the Battery ContactsSetting the PULSE/TONE Switch Low battery indicatorBase ringer volume Adjusting the Volume ControlsHandset ringer volume Handset earpiece volumePull back on the release tab. Lift the beltclip up Installing the BeltclipTo attach the beltclip To remove the beltclipAutomatic Digital Code Security Headset InstallationTo reset the digital security code Restore power to the base Place the handset on the baseBasic 2-line operation Making and Receiving CallsAnswering a Call from the Base Making a Call from the Base Making a Call from the HandsetOff-Hook Dialing Using the Tone Feature Flash and Call WaitingOn-Hook Dialing Press line 1, then press redial/p Using RedialPlacing a Call on Hold To redial from the handsetHandset beeps for 60 seconds Following screen appears Using the Mute FeatureUsing the page Feature You can hear the party on line 1, but they cannot hear youExtension In Use Line OperationWAY Conferencing Press int’com on the handset to answer Speak within 12 inches of the base microphone Using Your EXS 9660 IntercomFrom the Base to the Handset Press page/int’com on the baseCall with the intercom On the base, press line 1 to talk Transferring a CallFrom Handset to Base Answer at the base by pressingTraveling OUT-OF-RANGE Display is ready for a number to be entered On the HandsetKeys to move right or left or to create a blank space Del key deletes characters as the cursor moves leftOn the Base Use the and keys to move the cursor left and right To edit a number you have stored in the handsetPress del to remove an unwanted character Press select Following screen appears Erasing a Number from MemoryAfter erasing a number, you may add a new address to memory From the HandsetFrom the Base Using Memory Dialing On-Hook Dialing from the HandsetPress line 1. The number dials Number dials Off-Hook Dialing from the HandsetDialing from the Base Press line 1. The line 1 LED lightsUsing Caller ID Setting up Caller ID optionsTurning AutoTalk and Caller ID/Call Waiting On or Off Programming Your Area Code If you want to set CIDCW, useKeys to move the cursor Press the select key to toggle between On and OffWith the date, time, call count Reviewing Caller ID name/numbersUse or to select line Press select Press to scan through Name/numbersSelect the name/number that you would like to dial Press memory to store the selected message Storing a Caller ID number in a memory locationDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Quick Reference Chart General Base UnitHandset At Uniden, we’ll take care of you Thank YOU