Uniden EXS 9660 manual General, Base Unit, Handset

Page 47

SPECIFICATIONS

YOUR NEW PHONE

GENERAL

The EXS 9660 complies with FCC Parts 15 and 68.

Frequency control:

PLL

Modulation:

Direct Sequence Spread Spectrum; DBPSK

Operating temperature:

0º to +50º C (+32º F to +122º F)

BASE UNIT

Frequency:

904.2 to 925.8 MHz (20 channels)

Power requirements:

10V 500 mA (from AC adapter)

Size:

7-3/8 in.(W) x 3-1/2 in. (D) x 8-3/4 in. (H)

Weight:

Approx. 11.9 oz. (including optional battery)

HANDSET

Frequency:

904.2 to 925.8 MHz (20 channels)

Power requirements:

Rechargeable Nickel-Cadmium battery pack

Size (without antenna):

2-1/4 in. (W) x 1-3/4 in. (D) x 7-1/4 in. (H)

Weight:

Approx. 9.3 oz. (including battery)

Battery:

BT-990

Capacity

600 mAH, 3.6V

Talk mode

4 hours

Standby mode

7 days

Specifications, features, and availability of optional accessories are all subject to change without prior notice.

45

Image 47
Contents R E a D Spectrum Controls and Functions Contents Welcome FeaturesIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Standard wall plate mounting Wall InstallationDirect wall mounting Page Page Installing the Handset Battery Pack Charging optional battery packs Charging the Battery PackInitial battery charging To avoid Memory Effect Cleaning the Battery ContactsSetting the PULSE/TONE Switch Low battery indicatorBase ringer volume Adjusting the Volume ControlsHandset ringer volume Handset earpiece volumePull back on the release tab. Lift the beltclip up Installing the BeltclipTo attach the beltclip To remove the beltclipAutomatic Digital Code Security Headset InstallationTo reset the digital security code Restore power to the base Place the handset on the baseBasic 2-line operation Making and Receiving CallsAnswering a Call from the Base Off-Hook Dialing Making a Call from the BaseMaking a Call from the Handset On-Hook Dialing Using the Tone FeatureFlash and Call Waiting Press line 1, then press redial/p Using RedialPlacing a Call on Hold To redial from the handsetHandset beeps for 60 seconds Following screen appears Using the Mute FeatureUsing the page Feature You can hear the party on line 1, but they cannot hear youExtension In Use Line OperationWAY Conferencing Press int’com on the handset to answer Speak within 12 inches of the base microphone Using Your EXS 9660 IntercomFrom the Base to the Handset Press page/int’com on the baseCall with the intercom On the base, press line 1 to talk Transferring a CallFrom Handset to Base Answer at the base by pressingTraveling OUT-OF-RANGE Display is ready for a number to be entered On the HandsetKeys to move right or left or to create a blank space Del key deletes characters as the cursor moves leftOn the Base Use the and keys to move the cursor left and right To edit a number you have stored in the handsetPress del to remove an unwanted character Press select Following screen appears Erasing a Number from MemoryAfter erasing a number, you may add a new address to memory From the HandsetFrom the Base Press line 1. The number dials Using Memory DialingOn-Hook Dialing from the Handset Number dials Off-Hook Dialing from the HandsetDialing from the Base Press line 1. The line 1 LED lightsTurning AutoTalk and Caller ID/Call Waiting On or Off Using Caller IDSetting up Caller ID options Programming Your Area Code If you want to set CIDCW, useKeys to move the cursor Press the select key to toggle between On and OffWith the date, time, call count Reviewing Caller ID name/numbersUse or to select line Press select Press to scan through Name/numbersSelect the name/number that you would like to dial Press memory to store the selected message Storing a Caller ID number in a memory locationDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Quick Reference Chart Handset GeneralBase Unit At Uniden, we’ll take care of you Thank YOU