Uniden EXS 9660 manual Direct wall mounting

Page 9

Before you plug the other end of the telephone cord into the modular jack on the wall, charge the battery (See CHARGING THE BATTERY PACK, page 11).

6. Align the mounting slots on the base with the mounting posts on the wall. Push in and down until the phone is firmly seated.

7.On the base, pull the handset retainer out of the slot. Rotate clockwise 180°.

8.Flip the retainer from front to back.

Slide it back into the slot so that the lip of the

retainer is up and the oval is down. The retainer holds the handset in place.

▼Direct wall mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

●Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting the screws into the wall.

●Mount your phone near a working phone jack to avoid excessive cord lengths.

●Make sure the wall material is capable of supporting the weight of the base and the handset.

7

Image 9

Contents R E a D Spectrum Controls and Functions Contents Welcome FeaturesIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Standard wall plate mounting Wall InstallationDirect wall mounting Page Page Installing the Handset Battery Pack Charging the Battery Pack Initial battery chargingCharging optional battery packs Setting the PULSE/TONE Switch Cleaning the Battery ContactsLow battery indicator To avoid Memory EffectHandset ringer volume Adjusting the Volume ControlsHandset earpiece volume Base ringer volumeTo attach the beltclip Installing the BeltclipTo remove the beltclip Pull back on the release tab. Lift the beltclip upTo reset the digital security code Headset InstallationRestore power to the base Place the handset on the base Automatic Digital Code SecurityBasic 2-line operation Making and Receiving CallsAnswering a Call from the Base Making a Call from the Base Making a Call from the HandsetOff-Hook Dialing Using the Tone Feature Flash and Call WaitingOn-Hook Dialing Placing a Call on Hold Using RedialTo redial from the handset Press line 1, then press redial/pUsing the page Feature Using the Mute FeatureYou can hear the party on line 1, but they cannot hear you Handset beeps for 60 seconds Following screen appearsExtension In Use Line OperationWAY Conferencing Press int’com on the handset to answer From the Base to the Handset Using Your EXS 9660 IntercomPress page/int’com on the base Speak within 12 inches of the base microphoneFrom Handset to Base Transferring a CallAnswer at the base by pressing Call with the intercom On the base, press line 1 to talkTraveling OUT-OF-RANGE Keys to move right or left or to create a blank space On the HandsetDel key deletes characters as the cursor moves left Display is ready for a number to be enteredOn the Base Use the and keys to move the cursor left and right To edit a number you have stored in the handsetPress del to remove an unwanted character After erasing a number, you may add a new address to memory Erasing a Number from MemoryFrom the Handset Press select Following screen appearsFrom the Base Using Memory Dialing On-Hook Dialing from the HandsetPress line 1. The number dials Dialing from the Base Off-Hook Dialing from the HandsetPress line 1. The line 1 LED lights Number dialsUsing Caller ID Setting up Caller ID optionsTurning AutoTalk and Caller ID/Call Waiting On or Off Keys to move the cursor If you want to set CIDCW, usePress the select key to toggle between On and Off Programming Your Area CodeUse or to select line Reviewing Caller ID name/numbersPress select Press to scan through Name/numbers With the date, time, call countSelect the name/number that you would like to dial Press memory to store the selected message Storing a Caller ID number in a memory locationDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Quick Reference Chart General Base UnitHandset At Uniden, we’ll take care of you Thank YOU