Sharp MD-MT16H To check the remaining disc time, Double time recording in monaural mode

Page 19

To check the remaining disc time

Whilst recording, you can check the remaining time available on the disc.

Press the DISPLAY button whilst recording or whilst in the recording pause mode.

Remaining recordable time

When the DISPLAY button is pressed again, the unit will return to the initial display.

Note:

The display of the remaining disc time may vary slightly from the actual remaining time. (Page 39)

To create your own track numbers whilst recording

You can create your own track numbers at special points in a recording, so that these points can easily be found later.

At any point where you want to create a track number whilst recording, press the REC button.

The track number will be written on the disc and the recording will continue uninterrupted.

Double time recording in monaural mode

When recording in the monaural long-play mode, it can be about twice as long as the re- cording time available for a stereo recording. The monaural long-play mode is very useful for recording conferences or lectures.

Press the MODE button whilst the recording is paused.

Each time this button is pressed, the display will switch between the stereo mode and the monaural long-play mode.

Lights up whilst in the monaural long-play mode.

Notes:

If input is from a stereo source, the sounds from the left and right channels will be combined.

Although the monitor sound you hear in the earphones whilst recording is in stereo, recording will be monaural.

MiniDiscs recorded in the monaural long-play mode may not play on other MD players.

When a recording is made in the mon- aural long-play mode, you will be able to play back the MiniDisc twice as fast as the normal playback speed. (Page 25)

When the unit is stopped after a recording has been made in the monaural long-play mode, the recording mode will return to the stereo mode automatically.

18

* MD-MT16H FOR UK(01-21)

19

99.4.2, 0:57 PM

Image 19
Contents MD-MT16E Special Notes Service InformationMD-MT16H for UK01-21 99.4.2, 056 PM Introduction ContentsAccessories Optional AccessoriesPrecautions PrecautionsVolume setting Concern for others when listen- ing to MiniDiscs18 19 Names of Controls and IndicatorsAlkaline batteries power Power SourcePrecautions for alkaline battery use To the DC in 5V socket Rechargeable battery powerInsert securely 50/60 Hz All the way AC power About the rechargeable batteryDo not drop or subject the battery to shock Digital recording Before RecordingType of recording Analogue recordingPlayback-only MiniDisc Types of discsRecordable MiniDisc To prevent recorded discs from being erased accidentallyTo stop recording Recording Using the Analogue CableRecording from CDs or MDs Synchro recording To interrupt recordingTo remove the MiniDisc To turn off the powerRecording from a tuner or a CD Manual recording Manual recording Recording Using the Optical Digital CableThere are cases where digital recording may be impossible Start recording Synchro recordingRecording from the microphone Mic synchro recording Recording from the MicrophonePress the /OFF button To interrupt a synchro recordingRecording from the microphone Mic manual recording To interrupt a recordingTimed auto mark will be created every 5 minutes Example when the setting is for 5 minutesConvenient Recording Function About the timed auto mark1Press the Edit button whilst the recording is paused Recording tracks as a single trackTo start recording from the middle of an existing track Making a track number automati- callyTo check the remaining disc time Double time recording in monaural modeTo create your own track numbers whilst recording To erase all of the tracks at once To erase tracks To erase tracks one at a timeAbout Track Numbers When recording from digital inputs CDs/MiniDiscs onlyAbout the TOC When is the TOC recorded?About TOC recording Track number Track name Playback does not start when a MiniDisc is insertedPlaying a Minidisc EarphonesTo stop playback To interrupt playback To remove the MiniDiscResume auto play function Convenient Playback Functions To play at double speed Mono recording only Random play or repeat playTo interrupt fast playback To display the playing time of an indi- vidual track To check the elapsed time and remaining time of the trackName/stamp EditingWhat the editing function can do Disc/Track nameDivide MoveExample Following cases, tracks may not be combined When one or both tracks to be combined have a nameCombine Disc nameTo erase a character Type of characters Characters symbolsTrack name Lights upMaster MiniDisc Recordable To change disc names or track namesTo delete characters To add charactersMD-MT16H for UK22-42 99.4.2, 055 PM Listening through a car stereo Using with Other EquipmentTo prevent the unit from being operated by mistake Checking the remaining amount of battery levelHow to read the battery indicator Convenient Operation of the UnitWhilst in the stop mode To cancel the auto-play functionTo eliminate the confirmation sound Hold down the Mode button until SET UP appears To cancel the auto power save functionTroubleshooting What is a MINIDISC?If trouble occurs Minidisc System Limitations Blank Disc Error MessagesGeneral MaintenanceSpecifications CleaningMiniDisc Recorder A9904.TO Terms of Guarantee