Sharp MD-MT16H Convenient Operation of the Unit, Checking the remaining amount of battery level

Page 35

CONVENIENT OPERATION OF THE UNIT

■Checking the remaining amount of battery level

The remaining amount of battery level is

shown by the battery indicator ( ) dur- ing operation.

Battery indicator

< How to read the battery indicator >

When the battery								When the battery
level is high								level is very low

Since the battery level is very low, you cannot start recording or editing.

●When the battery is completely dis- charged, the battery indicator will flash. Recharge the battery or replace the al- kaline batteries with a new one.

●When the battery has run completely out, “BATT EMPTY” will appear. Then, the power will be disconnected auto- matically.

Notes:

●When using the unit with alkaline bat- teries or a rechargeable battery, the bat- tery indicator will not correctly display the remaining capacity for approximately 10 seconds after the power has been turned on.

●When an AC adaptor or a car adaptor is used, the battery indicator will not be shown.

●The number of bars shown in the bat- tery indicator may increase or de- crease, depending on the operation being performed. This is normal.

■To prevent the unit from being operated by mistake

To avoid accidental operation of the unit, use the hold function.

Move the HOLD switch to the safety posi- tion (direction indicated by the arrow).

●When the unit is in the hold mode, press- ing the buttons will have no affect.

●To cancel the hold mode, move the HOLD switch away from the safety po- sition (the opposite direction of the ar- row).

If the hold function is active whilst the power is turned off, the power cannot be turned on by mistake and the battery will not be accidentally drained.

34

* MD-MT16H FOR UK(22-42)

35

99.4.2, 0:55 PM

Image 35

Contents MD-MT16E Special Notes Service InformationMD-MT16H for UK01-21 99.4.2, 056 PM Introduction ContentsAccessories Optional AccessoriesPrecautions PrecautionsVolume setting Concern for others when listen- ing to MiniDiscs18 19 Names of Controls and IndicatorsPrecautions for alkaline battery use Power SourceAlkaline batteries power Insert securely 50/60 Hz All the way Rechargeable battery powerTo the DC in 5V socket Do not drop or subject the battery to shock About the rechargeable batteryAC power Digital recording Before RecordingType of recording Analogue recordingPlayback-only MiniDisc Types of discsRecordable MiniDisc To prevent recorded discs from being erased accidentallyTo stop recording Recording Using the Analogue CableRecording from CDs or MDs Synchro recording To interrupt recordingRecording from a tuner or a CD Manual recording To turn off the powerTo remove the MiniDisc Manual recording Recording Using the Optical Digital CableThere are cases where digital recording may be impossible Start recording Synchro recordingRecording from the microphone Mic synchro recording Recording from the MicrophonePress the /OFF button To interrupt a synchro recordingRecording from the microphone Mic manual recording To interrupt a recordingTimed auto mark will be created every 5 minutes Example when the setting is for 5 minutesConvenient Recording Function About the timed auto mark1Press the Edit button whilst the recording is paused Recording tracks as a single trackTo start recording from the middle of an existing track Making a track number automati- callyTo create your own track numbers whilst recording Double time recording in monaural modeTo check the remaining disc time To erase all of the tracks at once To erase tracks To erase tracks one at a timeAbout Track Numbers When recording from digital inputs CDs/MiniDiscs onlyAbout TOC recording When is the TOC recorded?About the TOC Track number Track name Playback does not start when a MiniDisc is insertedPlaying a Minidisc EarphonesResume auto play function To interrupt playback To remove the MiniDiscTo stop playback Convenient Playback Functions To interrupt fast playback Random play or repeat playTo play at double speed Mono recording only To display the playing time of an indi- vidual track To check the elapsed time and remaining time of the trackName/stamp EditingWhat the editing function can do Disc/Track nameExample MoveDivide Following cases, tracks may not be combined When one or both tracks to be combined have a nameCombine Disc nameTo erase a character Type of characters Characters symbolsTrack name Lights upMaster MiniDisc Recordable To change disc names or track namesTo delete characters To add charactersMD-MT16H for UK22-42 99.4.2, 055 PM Listening through a car stereo Using with Other EquipmentTo prevent the unit from being operated by mistake Checking the remaining amount of battery levelHow to read the battery indicator Convenient Operation of the UnitTo eliminate the confirmation sound To cancel the auto-play functionWhilst in the stop mode Hold down the Mode button until SET UP appears To cancel the auto power save functionTroubleshooting What is a MINIDISC?If trouble occurs Minidisc System Limitations Blank Disc Error MessagesGeneral MaintenanceSpecifications CleaningMiniDisc Recorder A9904.TO Terms of Guarantee