Sharp MD-MT16H operation manual Rechargeable battery power, To the DC in 5V socket

Page 8

	1
	2
	3
	4	5
	4
	To the DC IN 5V socket
	Insert securely,	AC 230-240V,
	Insert securely,	50/60 Hz
	all the way in.	50/60 Hz
	all the way in.
	* MD-MT16H FOR UK(01-21)	8

■Rechargeable battery power

When the rechargeable battery is used for the first time or when you want to use it after a long period of disuse, be sure to charge it fully.

1 Open the battery cover.

●Slide the battery cover as far as it will go to the outside and then lift to open it. If the battery cover is lifted without be- ing slid all the way out, it may break.

2 Insert the rechargeable battery according to the polarity marked on the bottom of the unit.

3 Close the battery cover.

4 Plug the AC adaptor into the AC socket, and then insert the plug on the AC adaptor lead into the DC IN 5V socket.

5 Press the CHARGE button to begin charging.

●“ ” will appear, and the battery will begin charging.

●After about 4 hours have passed,

“ ” will go out.

This indicates that the battery charging is about 90% complete.

●To charge the battery fully, continue charging for about 2 more hours. (In this case, you do not need to press the CHARGE button. Even if the

CHARGE button is pressed, “ ”

will not appear.)

Notes:

●After charging has been completed, the AC adaptor may be left connected. (For example, when charging at night)

●The battery will not be charged when the power to the main unit is turned on.

●Do not force open the battery cover too wide.

●Do not use a rechargeable battery or an AC adaptor other than those specified on page 3 (OPTIONAL ACCESSORIES).

●The charging time will vary, depending on the condition of the battery.

●When the battery is charged for the first time or is charged after not being used for a long period, the operating time may be shorter than normal. The battery life will recover with normal use i.e. charg- ing and discharging.

●To avoid shortening the service life of the battery only recharge the battery after in has been completely discharged.

7

99.4.2, 0:56 PM

Image 8

Contents MD-MT16E Service Information Special NotesMD-MT16H for UK01-21 99.4.2, 056 PM Contents AccessoriesOptional Accessories IntroductionPrecautions Volume settingConcern for others when listen- ing to MiniDiscs PrecautionsNames of Controls and Indicators 18 19Precautions for alkaline battery use Power SourceAlkaline batteries power Insert securely 50/60 Hz All the way Rechargeable battery powerTo the DC in 5V socket Do not drop or subject the battery to shock About the rechargeable batteryAC power Before Recording Type of recordingAnalogue recording Digital recordingTypes of discs Recordable MiniDiscTo prevent recorded discs from being erased accidentally Playback-only MiniDiscRecording Using the Analogue Cable Recording from CDs or MDs Synchro recordingTo interrupt recording To stop recordingRecording from a tuner or a CD Manual recording To turn off the powerTo remove the MiniDisc Recording Using the Optical Digital Cable There are cases where digital recording may be impossibleStart recording Synchro recording Manual recordingRecording from the Microphone Recording from the microphone Mic synchro recordingTo interrupt a synchro recording Recording from the microphone Mic manual recordingTo interrupt a recording Press the /OFF buttonExample when the setting is for 5 minutes Convenient Recording FunctionAbout the timed auto mark Timed auto mark will be created every 5 minutesRecording tracks as a single track To start recording from the middle of an existing trackMaking a track number automati- cally 1Press the Edit button whilst the recording is pausedTo create your own track numbers whilst recording Double time recording in monaural modeTo check the remaining disc time To erase tracks To erase tracks one at a time To erase all of the tracks at onceWhen recording from digital inputs CDs/MiniDiscs only About Track NumbersAbout TOC recording When is the TOC recorded?About the TOC Playback does not start when a MiniDisc is inserted Playing a MinidiscEarphones Track number Track nameResume auto play function To interrupt playback To remove the MiniDiscTo stop playback Convenient Playback Functions To interrupt fast playback Random play or repeat playTo play at double speed Mono recording only To check the elapsed time and remaining time of the track To display the playing time of an indi- vidual trackEditing What the editing function can doDisc/Track name Name/stampExample MoveDivide When one or both tracks to be combined have a name CombineDisc name Following cases, tracks may not be combinedType of characters Characters symbols Track nameLights up To erase a characterTo change disc names or track names To delete charactersTo add characters Master MiniDisc RecordableMD-MT16H for UK22-42 99.4.2, 055 PM Using with Other Equipment Listening through a car stereoChecking the remaining amount of battery level How to read the battery indicatorConvenient Operation of the Unit To prevent the unit from being operated by mistakeTo eliminate the confirmation sound To cancel the auto-play functionWhilst in the stop mode To cancel the auto power save function Hold down the Mode button until SET UP appearsWhat is a MINIDISC? TroubleshootingIf trouble occurs Minidisc System Limitations Error Messages Blank DiscMaintenance SpecificationsCleaning GeneralMiniDisc Recorder Terms of Guarantee A9904.TO