Sharp MD-MT16H Recording Using the Analogue Cable, Recording from CDs or MDs Synchro recording

Page 12

RECORDING USING THE ANALOGUE CABLE

■Recording from CDs or MDs (Synchro recording)

Synchro recording is a method that detects the playback sound from the source equipment. When sound is present, it automatically starts the recording. When the source is silent, the recording will be paused.

1 Connect the external equipment. (See page 9.)

2 Insert a recordable MiniDisc.

2

1

OPEN

4

3

3 Press the REC button.

●To record from a tuner, first tune in a broadcast.

●To record from a CD, first start playing the track you want to record.

4 Whilst playing sound from the external equipment connected to this unit, press the 5 or 4 button to adjust the recording level.

0dB

–4dB

●Adjust the recording level so that the maximum sound volume from the source makes the reading swing somewhere between – 4 dB and 0 dB.

●To record from a CD, first adjust the recording level.

Then put the equipment connected to this unit into the playback stand-by mode.

5 Press the ENTER/SYNC button.

Flashing

6 Begin playback on the source equipment.

●Recording will begin automatically.

To interrupt recording:

●When the source equipment is stopped, the unit will enter the synchro recording stand-by mode.

When playback is resumed, a recording will be resumed.

●If a silence lasts for 3 seconds or more, the recording will be paused.

●Pressing the 06 button on this unit (when in this mode) will cause the unit to enter the recording stand-by mode and cancel the synchro recording mode.

●The track number will be increased by one each time the recording is interrupted.

To stop recording:

Press the ■/:OFF button.

●If the unit is left unattended after the recording is complete, the power will automatically shut off in approximately 2 minutes.

11

* MD-MT16H FOR UK(01-21)

12

99.4.2, 0:57 PM

Image 12

Contents MD-MT16E Service Information Special NotesMD-MT16H for UK01-21 99.4.2, 056 PM Contents AccessoriesOptional Accessories IntroductionPrecautions Volume settingConcern for others when listen- ing to MiniDiscs PrecautionsNames of Controls and Indicators 18 19Power Source Alkaline batteries powerPrecautions for alkaline battery use Rechargeable battery power To the DC in 5V socketInsert securely 50/60 Hz All the way About the rechargeable battery AC powerDo not drop or subject the battery to shock Before Recording Type of recordingAnalogue recording Digital recordingTypes of discs Recordable MiniDiscTo prevent recorded discs from being erased accidentally Playback-only MiniDiscRecording Using the Analogue Cable Recording from CDs or MDs Synchro recordingTo interrupt recording To stop recordingTo turn off the power To remove the MiniDiscRecording from a tuner or a CD Manual recording Recording Using the Optical Digital Cable There are cases where digital recording may be impossibleStart recording Synchro recording Manual recordingRecording from the Microphone Recording from the microphone Mic synchro recordingTo interrupt a synchro recording Recording from the microphone Mic manual recordingTo interrupt a recording Press the /OFF buttonExample when the setting is for 5 minutes Convenient Recording FunctionAbout the timed auto mark Timed auto mark will be created every 5 minutesRecording tracks as a single track To start recording from the middle of an existing trackMaking a track number automati- cally 1Press the Edit button whilst the recording is pausedDouble time recording in monaural mode To check the remaining disc timeTo create your own track numbers whilst recording To erase tracks To erase tracks one at a time To erase all of the tracks at onceWhen recording from digital inputs CDs/MiniDiscs only About Track NumbersWhen is the TOC recorded? About the TOCAbout TOC recording Playback does not start when a MiniDisc is inserted Playing a MinidiscEarphones Track number Track nameTo interrupt playback To remove the MiniDisc To stop playbackResume auto play function Convenient Playback Functions Random play or repeat play To play at double speed Mono recording onlyTo interrupt fast playback To check the elapsed time and remaining time of the track To display the playing time of an indi- vidual trackEditing What the editing function can doDisc/Track name Name/stampMove DivideExample When one or both tracks to be combined have a name CombineDisc name Following cases, tracks may not be combinedType of characters Characters symbols Track nameLights up To erase a characterTo change disc names or track names To delete charactersTo add characters Master MiniDisc RecordableMD-MT16H for UK22-42 99.4.2, 055 PM Using with Other Equipment Listening through a car stereoChecking the remaining amount of battery level How to read the battery indicatorConvenient Operation of the Unit To prevent the unit from being operated by mistakeTo cancel the auto-play function Whilst in the stop modeTo eliminate the confirmation sound To cancel the auto power save function Hold down the Mode button until SET UP appearsWhat is a MINIDISC? TroubleshootingIf trouble occurs Minidisc System Limitations Error Messages Blank DiscMaintenance SpecificationsCleaning GeneralMiniDisc Recorder Terms of Guarantee A9904.TO