Sharp MD-MT16H operation manual MiniDisc Recorder

Page 43

●The continuous recording time is for analogue inputs when the volume level is set to “VOL 0”.

●The continuous play time shows the value when the volume level is set to “VOL 15”.

●The above values are the standard values when the unit is charged and used at an ambient temperature of 20°C (68°F).

●The operating time when using an alkaline batteries may be different, depending on the type and manufacturer of the battery, and on the operating temperature.

Input sensitivity:	Recording level	Reference input level	Input impedance
	Recording level	Reference input level	Input impedance

	MIC H	0.25 mV	10 k ohms

	MIC L	2.5 mV	10 k ohms

	LINE	100 mV	20 k ohms

Output level:

Dimensions:

Weight: Input socket: Output socket:

	Specified	Maximum	Load
	output	output level	impedance
Earphones	—	10 mW + 10 mW	32 ohms
LINE	250 mV	—	10 k ohms
LINE	(–12dB)		10 k ohms
	(–12dB)

Width: 87.9 mm (3-7/16")

Height: 29.8 mm (1-3/16")

Depth: 79.7 mm (3-1/8")

180g (0.40 lbs.) without battery

Line/optical digital, microphone (powered by the main unit)

Earphones (impedance: 32 ohms)

■MiniDisc Recorder

Type:	Portable MiniDisc recorder
Signal readout:	Non-contact, 3-beam semi-conductor laser pick-up
Audio channels:	Stereo 2 channels/monaural (long-play mode) 1 channel
Frequency response:	20 – 20,000 Hz (± 3 dB)
Rotation speed:	Approx. 400 – 900 rpm
Error correction:	ACIRC (Advanced Cross Interleave Reed-Solomon Code)
Coding:	ATRAC (Adaptive Transform Acoustic Coding), 24-bit computed
	type
Recording method:	Magnetic modulation overwrite method
Sampling frequency:	44.1 kHz (32 kHz and 48 kHz signals are converted to 44.1 kHz,
	and then recorded.)
Wow and flutter:	Unmeasurable (less than ±0.001% W. peak)
	42

* MD-MT16H FOR UK(22-42)

43

99.4.2, 0:55 PM

Image 43

Contents MD-MT16E Special Notes Service InformationMD-MT16H for UK01-21 99.4.2, 056 PM Introduction ContentsAccessories Optional AccessoriesPrecautions PrecautionsVolume setting Concern for others when listen- ing to MiniDiscs18 19 Names of Controls and IndicatorsAlkaline batteries power Power SourcePrecautions for alkaline battery use To the DC in 5V socket Rechargeable battery powerInsert securely 50/60 Hz All the way AC power About the rechargeable batteryDo not drop or subject the battery to shock Digital recording Before RecordingType of recording Analogue recordingPlayback-only MiniDisc Types of discsRecordable MiniDisc To prevent recorded discs from being erased accidentallyTo stop recording Recording Using the Analogue CableRecording from CDs or MDs Synchro recording To interrupt recordingTo remove the MiniDisc To turn off the powerRecording from a tuner or a CD Manual recording Manual recording Recording Using the Optical Digital CableThere are cases where digital recording may be impossible Start recording Synchro recordingRecording from the microphone Mic synchro recording Recording from the MicrophonePress the /OFF button To interrupt a synchro recordingRecording from the microphone Mic manual recording To interrupt a recordingTimed auto mark will be created every 5 minutes Example when the setting is for 5 minutesConvenient Recording Function About the timed auto mark1Press the Edit button whilst the recording is paused Recording tracks as a single trackTo start recording from the middle of an existing track Making a track number automati- callyTo check the remaining disc time Double time recording in monaural modeTo create your own track numbers whilst recording To erase all of the tracks at once To erase tracks To erase tracks one at a timeAbout Track Numbers When recording from digital inputs CDs/MiniDiscs onlyAbout the TOC When is the TOC recorded?About TOC recording Track number Track name Playback does not start when a MiniDisc is insertedPlaying a Minidisc EarphonesTo stop playback To interrupt playback To remove the MiniDiscResume auto play function Convenient Playback Functions To play at double speed Mono recording only Random play or repeat playTo interrupt fast playback To display the playing time of an indi- vidual track To check the elapsed time and remaining time of the trackName/stamp EditingWhat the editing function can do Disc/Track nameDivide MoveExample Following cases, tracks may not be combined When one or both tracks to be combined have a nameCombine Disc nameTo erase a character Type of characters Characters symbolsTrack name Lights upMaster MiniDisc Recordable To change disc names or track namesTo delete characters To add charactersMD-MT16H for UK22-42 99.4.2, 055 PM Listening through a car stereo Using with Other EquipmentTo prevent the unit from being operated by mistake Checking the remaining amount of battery levelHow to read the battery indicator Convenient Operation of the UnitWhilst in the stop mode To cancel the auto-play functionTo eliminate the confirmation sound Hold down the Mode button until SET UP appears To cancel the auto power save functionTroubleshooting What is a MINIDISC?If trouble occurs Minidisc System Limitations Blank Disc Error MessagesGeneral MaintenanceSpecifications CleaningMiniDisc Recorder A9904.TO Terms of Guarantee