■To change disc names or track names
Some MiniDiscs created on other equipment may have more than 100 characters in a track name or disc name. The characters from the 101st character and on cannot be corrected or changed.
To delete characters:
1 Put the unit in the character input mode.
●To delete characters in a disc name, perform steps 1 - 2 in the “Disc name” section. (page 29)
●To delete characters in a track name, perform steps 1 - 3 on page 30.
2 Press the VOLUME + or VOLUME – but- ton to move the cursor to the character you want to delete.
3 Press the BASS button.
●The character will be erased.
4 Press the EDIT button.
To add characters:
1 Put the unit in the character input mode.
●To add characters to a disc name, perform steps 1 - 2 in the “Disc name” section. (page 29)
●To add characters to a track name, perform steps 1 - 3 on page 30.
2 Press the VOLUME + or VOLUME – button to move the cursor to the right of the character, where you want to add a new character.
3 Perform steps 3 - 5 in the “Disc name” section. (pages 29 - 30)
4 Press the EDIT button.
■Name/stamp
Master MiniDisc | Recordable |
(Prerecorded MiniDisc) | MiniDisc |
1.The sound is recorded.
2.The character information, such as the disc name and track names is transferred
1Record the sound from the master MiniDisc onto a recordable MiniDisc.
Playback unit |
| Recording unit |
The sound is recorded.
MasterRecordable
MiniDiscMiniDisc
●Refer to the standard recording method. (Pages 9 - 15)
●At this point, only the sound is re- corded. No character information is transferred.
●Check whether the total number of tracks on the newly recorded MiniDisc matches the total number of tracks on the master MiniDisc. If they do not match each other, combine or divide tracks using the edit operation. (Pages 28 - 29)
●This function can not be performed from playback only MiniDiscs.
31
* | 32 | 99.4.2, 0:55 PM |