Sharp MD-MT16H Recording from the Microphone, Recording from the microphone Mic synchro recording

Page 15

RECORDING FROM THE MICROPHONE

■Recording from the microphone (Mic synchro recording)

The recording will begin automatically in response to a noise or a person speaking. When the sound stops, the recording will pause. This function is convenient when recording lectures, conferences, etc.

3 Press the REC button.

●A monaural, long-play recording mode is available. (Page 18)

●Timed identification marks can be created whilst recording. (Page 16)

4 Press the 5 or 4 button to adjust the recording level.

Stereo microphone

(commercially available)

MIC IN

PLUG IN

POWER

To the MIC

IN socket

1 Connect the stereo microphone to the MIC IN socket.

●When a microphone is connected to this unit, the unit will automatically switch to input from the microphone.

2 Insert a recordable MiniDisc. (See page 11.)

0dB

–4dB

●Adjust the recording level so that the maximum sound volume from the source makes the reading swing between –4 dB and 0 dB.

●When the recording level display is changed from “MIC H 21” to “MIC L 20”, the sound will be interrupted momentarily.

This is normal.

5 Press the ENTER/SYNC button to select the synchro recording level. (This level can be changed, even whilst recording.)

●Refer to the following table.

	Synchro	Sound level at which
	recording level
		to start recording
	display

Mic input	MIC SYNC H
	–24dB

	MIC SYNC L
	–12dB

●When the microphone input is set to “MIC SYNC H”, recording will start when the smallest noise is detected. If the unit starts recording too often from small unwanted noises, set the microphone input to “MIC SYNC L”.

Continued to the next page.

14

* MD-MT16H FOR UK(01-21)

15

99.4.2, 0:57 PM

Image 15

Contents MD-MT16E Special Notes Service InformationMD-MT16H for UK01-21 99.4.2, 056 PM Introduction ContentsAccessories Optional AccessoriesPrecautions PrecautionsVolume setting Concern for others when listen- ing to MiniDiscs18 19 Names of Controls and IndicatorsPower Source Alkaline batteries powerPrecautions for alkaline battery use Rechargeable battery power To the DC in 5V socketInsert securely 50/60 Hz All the way About the rechargeable battery AC powerDo not drop or subject the battery to shock Digital recording Before RecordingType of recording Analogue recordingPlayback-only MiniDisc Types of discsRecordable MiniDisc To prevent recorded discs from being erased accidentallyTo stop recording Recording Using the Analogue CableRecording from CDs or MDs Synchro recording To interrupt recordingTo turn off the power To remove the MiniDiscRecording from a tuner or a CD Manual recording Manual recording Recording Using the Optical Digital CableThere are cases where digital recording may be impossible Start recording Synchro recordingRecording from the microphone Mic synchro recording Recording from the MicrophonePress the /OFF button To interrupt a synchro recordingRecording from the microphone Mic manual recording To interrupt a recordingTimed auto mark will be created every 5 minutes Example when the setting is for 5 minutesConvenient Recording Function About the timed auto mark1Press the Edit button whilst the recording is paused Recording tracks as a single trackTo start recording from the middle of an existing track Making a track number automati- callyDouble time recording in monaural mode To check the remaining disc timeTo create your own track numbers whilst recording To erase all of the tracks at once To erase tracks To erase tracks one at a timeAbout Track Numbers When recording from digital inputs CDs/MiniDiscs onlyWhen is the TOC recorded? About the TOCAbout TOC recording Track number Track name Playback does not start when a MiniDisc is insertedPlaying a Minidisc EarphonesTo interrupt playback To remove the MiniDisc To stop playbackResume auto play function Convenient Playback Functions Random play or repeat play To play at double speed Mono recording onlyTo interrupt fast playback To display the playing time of an indi- vidual track To check the elapsed time and remaining time of the trackName/stamp EditingWhat the editing function can do Disc/Track nameMove DivideExample Following cases, tracks may not be combined When one or both tracks to be combined have a nameCombine Disc nameTo erase a character Type of characters Characters symbolsTrack name Lights upMaster MiniDisc Recordable To change disc names or track namesTo delete characters To add charactersMD-MT16H for UK22-42 99.4.2, 055 PM Listening through a car stereo Using with Other EquipmentTo prevent the unit from being operated by mistake Checking the remaining amount of battery levelHow to read the battery indicator Convenient Operation of the UnitTo cancel the auto-play function Whilst in the stop modeTo eliminate the confirmation sound Hold down the Mode button until SET UP appears To cancel the auto power save functionTroubleshooting What is a MINIDISC?If trouble occurs Minidisc System Limitations Blank Disc Error MessagesGeneral MaintenanceSpecifications CleaningMiniDisc Recorder A9904.TO Terms of Guarantee