Sharp operation manual MD-MT16H for UK22-42 99.4.2, 055 PM

Page 33

2 When the recording is complete, remove the newly recorded MiniDisc and load the master MiniDisc into the MD-MT16E.

●Do not mistake the master MiniDisc for the newly recorded MiniDisc.

3 Whilst in the stop mode, press the EDIT button to select “NAME STAMP”.

4 Press the ENTER/SYNC button.

●To cancel the operation, press the ■/:OFF button.

34

5 Press the ENTER/SYNC button.

●The character information of the master MiniDisc is being read.

6 When the unit displays “CHANGE MD”, remove the master MiniDisc.

●Remove the master MiniDisc without turning off the power. If you do, the operation will be cancelled.

8 Press the ENTER/SYNC button.

●The unit will finish recording the char- acter information and enter the stop mode.

Note:

●If the total number of tracks on the mas- ter MiniDisc does not match the total number of tracks on the newly recorded MiniDisc, the unit will display “Can’t WRITE” and the power will be turned off. If this happens, adjust the total number of tracks on the newly recorded MiniDisc using the edit operation, and then try again from step 2.

56

7 Load the newly recorded MiniDisc into the MD-MT16E.

●To cancel the operation, press the ■/:OFF button.

32

* MD-MT16H FOR UK(22-42)

33

99.4.2, 0:55 PM

Image 33

Contents MD-MT16E Special Notes Service InformationMD-MT16H for UK01-21 99.4.2, 056 PM Accessories ContentsOptional Accessories IntroductionVolume setting PrecautionsConcern for others when listen- ing to MiniDiscs Precautions18 19 Names of Controls and IndicatorsPower Source Alkaline batteries powerPrecautions for alkaline battery use Rechargeable battery power To the DC in 5V socketInsert securely 50/60 Hz All the way About the rechargeable battery AC powerDo not drop or subject the battery to shock Type of recording Before RecordingAnalogue recording Digital recordingRecordable MiniDisc Types of discsTo prevent recorded discs from being erased accidentally Playback-only MiniDiscRecording from CDs or MDs Synchro recording Recording Using the Analogue CableTo interrupt recording To stop recordingTo turn off the power To remove the MiniDiscRecording from a tuner or a CD Manual recording There are cases where digital recording may be impossible Recording Using the Optical Digital CableStart recording Synchro recording Manual recordingRecording from the microphone Mic synchro recording Recording from the MicrophoneRecording from the microphone Mic manual recording To interrupt a synchro recordingTo interrupt a recording Press the /OFF buttonConvenient Recording Function Example when the setting is for 5 minutesAbout the timed auto mark Timed auto mark will be created every 5 minutesTo start recording from the middle of an existing track Recording tracks as a single trackMaking a track number automati- cally 1Press the Edit button whilst the recording is pausedDouble time recording in monaural mode To check the remaining disc timeTo create your own track numbers whilst recording To erase all of the tracks at once To erase tracks To erase tracks one at a timeAbout Track Numbers When recording from digital inputs CDs/MiniDiscs onlyWhen is the TOC recorded? About the TOCAbout TOC recording Playing a Minidisc Playback does not start when a MiniDisc is insertedEarphones Track number Track nameTo interrupt playback To remove the MiniDisc To stop playbackResume auto play function Convenient Playback Functions Random play or repeat play To play at double speed Mono recording onlyTo interrupt fast playback To display the playing time of an indi- vidual track To check the elapsed time and remaining time of the trackWhat the editing function can do EditingDisc/Track name Name/stampMove DivideExample Combine When one or both tracks to be combined have a nameDisc name Following cases, tracks may not be combinedTrack name Type of characters Characters symbolsLights up To erase a characterTo delete characters To change disc names or track namesTo add characters Master MiniDisc RecordableMD-MT16H for UK22-42 99.4.2, 055 PM Listening through a car stereo Using with Other EquipmentHow to read the battery indicator Checking the remaining amount of battery levelConvenient Operation of the Unit To prevent the unit from being operated by mistakeTo cancel the auto-play function Whilst in the stop modeTo eliminate the confirmation sound Hold down the Mode button until SET UP appears To cancel the auto power save functionTroubleshooting What is a MINIDISC?If trouble occurs Minidisc System Limitations Blank Disc Error MessagesSpecifications MaintenanceCleaning GeneralMiniDisc Recorder A9904.TO Terms of Guarantee