Sharp MD-MT16H Combine, Disc name, When one or both tracks to be combined have a name

Page 30

■Combine

1 Start playing the last of the two tracks you want to combine, and press the 06 button.

●The unit will enter the pause mode.

2 Press the EDIT button to select “COMBINE”.

12

To combine the fifth and sixth tracks

3 Press the ENTER/SYNC button.

●To cancel the operation, press the

■/:OFF button.

3

(Confirming the combination)

4 Press the ENTER/SYNC button again.

●The two tracks will be combined, and the unit will be paused at the beginning of the combined track.

●The numbers assigned to the tracks following the combined track will be decreased by one automatically.

To combine two non-adjacent tracks: First, put the two tracks next to each other in the order you want using the MOVE function (page 28). Then combine them using the COMBINE function.

When one or both tracks to be combined have a name:

The first track name will be used. However, when the first track does not have a name, the second track name will be used.

In the following cases, tracks may not be combined.

●Tracks recorded in the monaural long-play mode and tracks recorded in the stereo mode.

●Tracks recorded from digital inputs and tracks recorded from analogue inputs.

●Tracks whose recording time is less than 12 seconds.

■Disc name

●Discs can be named using a maximum of 100 characters.

●Up to 1,700 characters (approximately) can be used in the disc and track names on a single MiniDisc.

1 Whilst in the stop mode, press the EDIT button to select “DISC NAME”.

2 Press the ENTER/SYNC button.

●The unit will enter the character input mode.

●To cancel the operation, press the

■/:OFF button.

12

Cursor

3 Press the DISPLAY button repeatedly to select the type of characters.

●The first 3 characters in the group of the selected characters will be displayed for about 1 second.

ABC(Capital letters)

abc (Lower-case letters)

123(Numbers and symbols)

4 Press the 5 or 4 button repeatedly to select the first letter in the name.

●When the button is pressed continuously, the displayed character will change rap- idly.

34

29

* MD-MT16H FOR UK(22-42)

30

99.4.2, 0:55 PM

Image 30

Contents MD-MT16E Service Information Special NotesMD-MT16H for UK01-21 99.4.2, 056 PM Optional Accessories ContentsAccessories IntroductionConcern for others when listen- ing to MiniDiscs PrecautionsVolume setting PrecautionsNames of Controls and Indicators 18 19Power Source Alkaline batteries powerPrecautions for alkaline battery use Rechargeable battery power To the DC in 5V socketInsert securely 50/60 Hz All the way About the rechargeable battery AC powerDo not drop or subject the battery to shock Analogue recording Before RecordingType of recording Digital recordingTo prevent recorded discs from being erased accidentally Types of discsRecordable MiniDisc Playback-only MiniDiscTo interrupt recording Recording Using the Analogue CableRecording from CDs or MDs Synchro recording To stop recordingTo turn off the power To remove the MiniDiscRecording from a tuner or a CD Manual recording Start recording Synchro recording Recording Using the Optical Digital CableThere are cases where digital recording may be impossible Manual recordingRecording from the Microphone Recording from the microphone Mic synchro recordingTo interrupt a recording To interrupt a synchro recordingRecording from the microphone Mic manual recording Press the /OFF buttonAbout the timed auto mark Example when the setting is for 5 minutesConvenient Recording Function Timed auto mark will be created every 5 minutesMaking a track number automati- cally Recording tracks as a single trackTo start recording from the middle of an existing track 1Press the Edit button whilst the recording is pausedDouble time recording in monaural mode To check the remaining disc timeTo create your own track numbers whilst recording To erase tracks To erase tracks one at a time To erase all of the tracks at onceWhen recording from digital inputs CDs/MiniDiscs only About Track NumbersWhen is the TOC recorded? About the TOCAbout TOC recording Earphones Playback does not start when a MiniDisc is insertedPlaying a Minidisc Track number Track nameTo interrupt playback To remove the MiniDisc To stop playbackResume auto play function Convenient Playback Functions Random play or repeat play To play at double speed Mono recording onlyTo interrupt fast playback To check the elapsed time and remaining time of the track To display the playing time of an indi- vidual trackDisc/Track name EditingWhat the editing function can do Name/stampMove DivideExample Disc name When one or both tracks to be combined have a nameCombine Following cases, tracks may not be combinedLights up Type of characters Characters symbolsTrack name To erase a characterTo add characters To change disc names or track namesTo delete characters Master MiniDisc RecordableMD-MT16H for UK22-42 99.4.2, 055 PM Using with Other Equipment Listening through a car stereoConvenient Operation of the Unit Checking the remaining amount of battery levelHow to read the battery indicator To prevent the unit from being operated by mistakeTo cancel the auto-play function Whilst in the stop modeTo eliminate the confirmation sound To cancel the auto power save function Hold down the Mode button until SET UP appearsWhat is a MINIDISC? TroubleshootingIf trouble occurs Minidisc System Limitations Error Messages Blank DiscCleaning MaintenanceSpecifications GeneralMiniDisc Recorder Terms of Guarantee A9904.TO