Additional features
Additional features
Sleep Mode
1. Press the Sleep Mode Auto button to set the time 
you want the unit to turn off automatically. 
2.The Timer is programmed in
The sleep mode is available for 1 to 7 times. To alter the time period in steps of 1 hour, press the Sleep Mode Button while aiming at air conditioner.
3.Make sure the Sleep Mode Auto LED lights up.
Setting the Time
1.Time can be set only when you have pressed the Reset button. If you have just replaced the batteries,
the Reset button should be pressed to reset the time.
Press the Start/Stop button.
To cancel the Sleep Mode, press the sleep Mode Auto button several times until the star (
) disappears from the operation display.
NOTICE The Sleep Mode will be operated at low fan speed (cooling) or medium fan speed (heat pump only) for quiet sleeping.
IN COOLING MODE: The temperature will automatically rise by 1°C (2°F) over the next 30 minutes and by 2°C (4°F) in 1 hour for comfortable sleeping.
2. | Press the Time Setting buttons until the desired time | |
| is set. |
|
|
| CANCEL |
3. | Press the Timer SET button. | SET |
NOTICE Check the indicator for A.M. and P.M.
Delay Start/Pre-Set Stop
1.Make sure the time is set correctly on the Remote Controller display.
2. Press the ON/OFF Timer | ON OFF |
buttons to turn Timer on or off. |
|
3. Press the Time Setting buttons until the desired time is set.
4. Press the selected on/off setting by | SET |
| |
pressing the Timer SET button while |
|
aiming the Remote Controller at the |
|
signal receptor. |
|
To cancel the setting the timer.
CANCEL Press the Timer Cancel button while aiming Remote Controller at the signal receptor. (The timer lamp on the air conditioner and the display will go out.)
NOTICE Select one of the following four types of operation. | with the unit running | ||
|
|
| |
Delay OFF Timer | Delay ON Timer | Delay OFF and ON Timer Delay ON and OFF Timer | |
18Room Air Conditioner