Heat Controller DMC36TB-1 There is risk of personal injury, Be careful and avoid personal injury

Page 7

Safety Precautions

Use a soft cloth to clean.

Do not use harsh detergents, solvents, etc.

There is risk of fire, electric shock or damage to the plastic parts of the product.

Always insert the filter securely. Clean the filter every two weeks or more often if necessary.

A dirty filter reduces the efficiency of the air conditioner and could cause product malfunction or damage.

Do not touch the metal parts of the product when removing the air filter. They are very sharp!

• There is risk of personal injury.

Do not drink the water drained from the unit.

It is not sanitary and could cause serious health issues.

Do not step on or put anything on the product. (outdoor unit)

There is risk of personal injury and failure of product.

Use a firm stool or ladder when cleaning or maintaining the air conditioner.

Be careful and avoid personal injury.

Replace all the batteries in the remote.

• There is risk of fire or explosion.

Disuse

Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire.

• They may burn or explode.

If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not use the remote if the batteries have leaked.

The chemicals in batteries could cause burns or other health hazards.

Owner's Manual 7

Image 7
Contents Important Information Heat CONTROLLER, INCTable of Contents Safety Precautions Do not allow water to run into electric part Do not handle the pipe by yourselfCostomerThere could result in personal injury and product damage There is risk of electrical shockThere is risk of fire or electrical ShockEnsure that water is drained Always check for Install the drain hose toInstallation or repair Away properly Product Do not install the productThey may burn or explode There is risk of personal injuryThere is risk of personal injury and failure of product Be careful and avoid personal injuryPrior to operation Storage and Tips For Using the Remote Controller Remote ControllerOperating Instructions Signal Receptor Signal transmitter Remote Control OperationNd F Button Cooling Operation Set the temperature lower than the room temperatureAuto Operation Temperature and fan speed are automatically set byHealthy Dehumidification Operation Fan speed mode is shiftedSound Of16C~30C60F~86F in 1C2F Temperature can be set within a rangeHeating OperationHeat pump model only Beep soundJet Cool Unit will operate in high fan speed in cooling/heating modeOr or 2nd F Operation Delay Start/Pre-Set Stop Additional featuresSleep Mode Setting the TimeVertical Airflow Direction Control Air Circulation ModeForced Operation Auto cleanHeat pump Model Quickly Auto restartVolatile substances Maintenance and ServiceIndoor Unit DiscolorationClosed Uniform When the air conditioner is to be used againClean the air filter regularly Do not overcool the room Keep blinds or curtainsCase Explanation See TroubleshootingHeat CONTROLLER, INC
Related manuals
Manual 29 pages 18.54 Kb