Heat Controller DMC36TB-1, DMH36TB-1 manual Safety Precautions

Page 3

Safety Precautions

Safety Precautions

To prevent the injury of the user or other people and property damage, the following instructions must be followed.

Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications.

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage to properties only.

The meanings of the symbols used in this manual are as shown below.

Be sure not to do.

Be sure to follow the instruction.

Installation

For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center.

There is risk of fire or electric shock.

Be cautious when unpacking and installing the product.

Shape edges could cause injury. Be especially careful of the sharp edges.

Install the panel and the

Do not install, remove, or re-

cover of control box securely.

install the unit by yourself

 

(customer).

• There is risk of fire or electric

• There is risk of fire, electric shock,

shock.

explosion or injury.

For installation, always

Do not install the product on

contact the dealer or an

a defective installation stand.

Authorized Service Center.

 

• There is risk of fire, electric shock,

• It may cause injury, accident, or

explosion, or injury.

damage to the product.

Owner's Manual 3

Image 3
Contents Important Information Heat CONTROLLER, INCTable of Contents Safety Precautions Do not allow water to run into electric part Do not handle the pipe by yourselfCostomerThere could result in personal injury and product damage There is risk of electrical shockThere is risk of fire or electrical ShockEnsure that water is drained Always check for Install the drain hose toInstallation or repair Away properly Product Do not install the productThey may burn or explode There is risk of personal injuryThere is risk of personal injury and failure of product Be careful and avoid personal injuryPrior to operation Remote Controller Storage and Tips For Using the Remote ControllerOperating Instructions Signal Receptor Remote Control Operation Signal transmitterNd F Button Cooling Operation Set the temperature lower than the room temperatureAuto Operation Temperature and fan speed are automatically set byFan speed mode is shifted Healthy Dehumidification OperationSound Of16C~30C60F~86F in 1C2F Temperature can be set within a rangeHeating OperationHeat pump model only Beep soundUnit will operate in high fan speed in cooling/heating mode Jet CoolOr or 2nd F Operation Delay Start/Pre-Set Stop Additional featuresSleep Mode Setting the TimeVertical Airflow Direction Control Air Circulation ModeAuto clean Forced OperationHeat pump Model Quickly Auto restartVolatile substances Maintenance and ServiceIndoor Unit DiscolorationClosed Uniform When the air conditioner is to be used againClean the air filter regularly Do not overcool the room Keep blinds or curtainsCase Explanation See TroubleshootingHeat CONTROLLER, INC
Related manuals
Manual 29 pages 18.54 Kb