Heat Controller DMC36TB-1, DMH36TB-1 Vertical Airflow Direction Control, Air Circulation Mode

Page 19

Additional features

Vertical Airflow Direction Control

The up/down airflow (Vertical Airflow) can be adjusted by using the remote control.

Press the Start/Stop button to start the unit.

Open the door on the remote control.

Press Chaos Swing button and the louvers will swing up and down. Press the Chaos Swing button again to set the vertical louver at the desired airflow direction.

NOTICE

❏If you press the CHAOS swing button, the horizontal airflow direction is changed automatically based on the CHAOS algorithm to distribute the air in the room evenly and at the same time to make the human body feel most comfortable, as if enjoying a natural breeze.

❏Always use the remote control to adjust the up/down airflow direction. Manually moving the vertical airflow direction louver by hand could damage the air conditioner.

❏When the unit is shut off, the up/down airflow direction louver will close the air outlet vent of the system.

Air Circulation Mode

Circulates the room air without cooling or heating.

1.Press the Start/Stop button. the unit will respond with a beep.

2.Open the door on the remote control. Press the Air Circulation button. Close the door on the remote control. Now each time that you press the Indoor Fan Speed Selector, the fan speed is shifted from low to CHAOS and back to low again.

CHAOS Air

Fan speed is on low. Fan speed is on medium. Fan speed is on high.

NOTICE

❏CHAOS Air economizes power consumption and prevents overcooling. The fan speed is automatically changed from high to low or vice versa, depending on the ambient temperature.

Owner's Manual 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Important Information Heat CONTROLLER, INCTable of Contents Safety Precautions Do not allow water to run into electric part Do not handle the pipe by yourselfCostomerThere could result in personal injury and product damage There is risk of electrical shockThere is risk of fire or electrical ShockEnsure that water is drained Always check for Install the drain hose toInstallation or repair Away properly Product Do not install the productThey may burn or explode There is risk of personal injuryThere is risk of personal injury and failure of product Be careful and avoid personal injuryPrior to operation Storage and Tips For Using the Remote Controller Remote ControllerOperating Instructions Signal Receptor Signal transmitter Remote Control OperationNd F Button Cooling Operation Set the temperature lower than the room temperatureAuto Operation Temperature and fan speed are automatically set byHealthy Dehumidification Operation Fan speed mode is shiftedSound Of16C~30C60F~86F in 1C2F Temperature can be set within a rangeHeating OperationHeat pump model only Beep soundJet Cool Unit will operate in high fan speed in cooling/heating modeOr or 2nd F Operation Delay Start/Pre-Set Stop Additional featuresSleep Mode Setting the TimeVertical Airflow Direction Control Air Circulation ModeForced Operation Auto cleanHeat pump Model Quickly Auto restartVolatile substances Maintenance and ServiceIndoor Unit DiscolorationClosed Uniform When the air conditioner is to be used againClean the air filter regularly Do not overcool the room Keep blinds or curtainsCase Explanation See TroubleshootingHeat CONTROLLER, INC
Related manuals
Manual 29 pages 18.54 Kb
Top Page Image Contents