Heat Controller DMC36TB-1 There is risk of electrical shock, There is risk of fire or electrical

Page 5

Safety Precautions

Stop operation and close any window in storm or hurricane before the hurricane arrives.

There is risk of property damage, failure of product, or electric shock.

Ventilate the product from time to time when operating it together with a stove, etc.

Do not open the inlet grill of the product during operation. (Do not touch the electrostatic filter, if the unit is so equipped.)

There is risk of physical injury, electric shock, or product.

Turn off breaker to the appliance before performing cleaning or maintenance.

When the product is soaked (flooded or submerged), contact an Authorized Service Center.

• There is risk of electrical shock.

When the product is not be used for a long time disconnect the power supply by turning off the breaker.

• There is risk of fire or electrical

• There is risk of electric shock.

shock.

 

There is risk of product damage or failure, or unintended operation.

Take care to ensure that nobody could step on or fall onto the outdoor unit.

There could result in personal injury and product damage.

Do not insert hands or other objects through the air inlet or outlet while the air conditioner is on.

There are sharp and moving parts that could cause personal injury.

Owner's Manual 5

Image 5
Contents Important Information Heat CONTROLLER, INCTable of Contents Safety Precautions Do not allow water to run into electric part Do not handle the pipe by yourselfCostomerThere is risk of fire or electrical There is risk of electrical shockShock There could result in personal injury and product damageInstallation or repair Away properly Product Always check for Install the drain hose toDo not install the product Ensure that water is drainedThere is risk of personal injury and failure of product There is risk of personal injuryBe careful and avoid personal injury They may burn or explodePrior to operation Operating Instructions Remote ControllerStorage and Tips For Using the Remote Controller Signal Receptor Nd F Button Remote Control OperationSignal transmitter Cooling Operation Set the temperature lower than the room temperatureAuto Operation Temperature and fan speed are automatically set bySound Fan speed mode is shiftedHealthy Dehumidification Operation Heating OperationHeat pump model only Temperature can be set within a rangeBeep sound Of16C~30C60F~86F in 1C2FOr or Unit will operate in high fan speed in cooling/heating modeJet Cool 2nd F Operation Sleep Mode Additional featuresSetting the Time Delay Start/Pre-Set StopVertical Airflow Direction Control Air Circulation ModeHeat pump Model Auto cleanForced Operation Quickly Auto restartIndoor Unit Maintenance and ServiceDiscoloration Volatile substancesClean the air filter regularly When the air conditioner is to be used againDo not overcool the room Keep blinds or curtains Closed UniformCase Explanation See TroubleshootingHeat CONTROLLER, INC
Related manuals
Manual 29 pages 18.54 Kb