Heat Controller DMH36TB-1, DMC36TB-1 manual Prior to operation

Page 8

Prior to operation

Prior to operation

Preparingforoperation

1.Contact an installation specialist for installation.

2.Connect the power cable between indoor unit and outdoor unit properly.

3.Use a dedicated circuit.

Usage

1.Being exposed to direct airflow for an extended period of time could be hazardous to your health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time.

2.Do not use this air conditioner for non-specified special purposes (e.g. preserving precision devices, food, pets, plants, and art objects). Such usage could damage the items.

Cleaningandmaintenance

1.Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling sharp metal edges.

2.Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation, leading to possible electric shock.

3.When cleaning the unit, first make sure that the power and breaker are turned off. There is a possibility of injury if the unit’s power is accidentally triggered on while cleaning inner parts of the unit.

Service

For repair and maintenance, contact your authorized service dealer.

SymbolsUsedinthisManual

This symbol alerts you to the risk of electric shock.

This symbol alerts you to hazards that could cause harm to the air conditioner.

NOTICE

This symbol indicates special notes.

8Room Air Conditioner

Image 8
Contents Heat CONTROLLER, INC Important InformationTable of Contents Safety Precautions Do not handle the pipe by yourselfCostomer Do not allow water to run into electric partThere is risk of electrical shock There is risk of fire or electricalShock There could result in personal injury and product damageAlways check for Install the drain hose to Installation or repair Away properly ProductDo not install the product Ensure that water is drainedThere is risk of personal injury There is risk of personal injury and failure of productBe careful and avoid personal injury They may burn or explodePrior to operation Operating Instructions Remote ControllerStorage and Tips For Using the Remote Controller Signal Receptor Nd F Button Remote Control OperationSignal transmitter Set the temperature lower than the room temperature Cooling OperationTemperature and fan speed are automatically set by Auto OperationSound Fan speed mode is shiftedHealthy Dehumidification Operation Temperature can be set within a range Heating OperationHeat pump model onlyBeep sound Of16C~30C60F~86F in 1C2FOr or Unit will operate in high fan speed in cooling/heating modeJet Cool 2nd F Operation Additional features Sleep ModeSetting the Time Delay Start/Pre-Set StopAir Circulation Mode Vertical Airflow Direction ControlHeat pump Model Auto cleanForced Operation Auto restart QuicklyMaintenance and Service Indoor UnitDiscoloration Volatile substancesWhen the air conditioner is to be used again Clean the air filter regularlyDo not overcool the room Keep blinds or curtains Closed UniformTroubleshooting Case Explanation SeeHeat CONTROLLER, INC
Related manuals
Manual 29 pages 18.54 Kb