Operating Instructions
Auto Operation
1
2
Press the Start/Stop button. The unit will respond with beep sound.
Open the door on the Remote Controller. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
Cooling | Auto | Healthy | Heating |
|
| Dehumidification | (Heat pump model only) |
(Cooling Only | (Heat Pump |
model) | model) |
ON
The temperature and fan speed are automatically set by the
3 electronic controls based on the actual room temperature. If you want to change the set temperature, press the Room Temperature Setting buttons. The set temperature will be changed considering room temperature.
To raise the temperature
To lower the temperature
DURING AUTO OPERATION:
❏You cannot switch the indoor fan speed. It has already been set by the Fuzzy rule.
❏If the system is not operating as desired, manually switch to another mode. The system will not automatically switch from the cooling mode to the heating mode, or from heating to cooling, then you must set the mode and the desired temperature again.
❏During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and down automatically. If you want to stop
Owner's Manual 13