Haier AD092XLERA, AD182XLERA, AD142XLERA Failure code, Failrue codes maked with * are resumable

Failure code

TROUBLE SHOOTING	FAILURE CODE		POSSIBLE REASONS
(outdoor unit)	(CHECK THE WIRED
	REMOTE CONTROLLER)
Faulty 4-way valve	25		Coil of 4-way valve is disconnected, or faulty
switching on			outdoor PCB
Faulty sensor Tc	26	*	Sensor disconnected, or broken, or short circuit
Faulty sensor Toci	2A	*	Sensor disconnected, or broken, or short circuit
Low voltage protection	2C		VDC<194V, too low voltage from power source
High voltage protection	2D		VDC>400V, too high voltage from power source
Abnormal communication	2E		Communication cables broken, or not be well
between main PCB and			connected, or faulty main PCB, or faulty SPDU
SPDU(or ISPM)			(or ISPM)
Compressor be locked	32		Faulty compressor or SPDU(or ISPM)
Compressor vibration too big	33		Faulty compressor
Compressor lose position	34		Faulty SPDU(or ISPM)
Faulty compressor start	35		Faulty compressor or SPDU(or ISPM)
Faulty position checking	37		Faulty SPDU(or ISPM)
circuit
Compressor broken	38		Faulty compressor or SPDU(or ISPM)

NOTE!

1.Please contact the installers or distributors when trouble happens to repair it.

2.Turn the power off and power on again, if the failure code recurs, please inform the franchiser.

3.Failrue codes maked with * are resumable.

25