Haier AD182XLERA, AD142XLERA, AD122XLERA, AD092XLERA installation manual Notes for safety

Page 8
 Notes for safety

Manual background Notes for safety

!The instructions with this warning mark must be carried out strictly,for they are all concerned with safety of the product or human beings.

The instructions with this warning mark must be carried out strictly, for they are all concerned with safety of the product or human beings.

Clean the dust filter periodically:

Blockage of the dust filter would reduce the cooling and heating effect, consume more power, water would be leaked during cooling, and other failures would also occur.

Use the fuse of required capacity:

Never use steel wire or copper wire to take place of the fuse.

Operate the unit with the remote controller.

Manual background The instructions with this prohibiting mark must be completely forbidden, otherwise the product would be damaged or the human being would be injured.

Never connect the earth wire with the gas pipe, water pipe, lightening arrester, or phone line.

Never install the air conditioner where the flammable gas is easily leaked. Do not spray any paint or insecticide on the air conditioner.

Never pour water on the indoor unit.

Keep the inlet and outlet of the didoor unit unblocked.

When the louver is being swung, never touch the outlet or put anything into the air grille.

6

Image 8
Contents R410A MULTI SPLIT SERIES ROOM AIR CONDITIONER No.0010577705AD092XLERA AD122XLERA AD142XLERA AD182XLERA Contents Safety precautionsNotes for safety Trouble shootingDisposal of the old air conditioner Safety Instructions and WarningsCautions Specifications CautionsSafety precautions CAUTIONS Safety precautionsCAUTIONS ON INSTALLATION Safety precautionsWiring LocationNotes for safety Parts and Functions INDOOR UNITTrouble shooting The followings are not malfuncitionUnit fails to start Trouble shootingUsing Directions Customer Need-to-knowWhen trouble happens Cooled air blown out when heatingInsufficient cooling or heating Insufficient coolingInstructions to installation 1. Safety precautionsInstructions to installation PRECAUTION2. Preparation for installation 3. Accessories for installation 4. Choose the installation place5.Installation procedure Instructions to installationInstructions to installation a h gInstructions to installation Installation for air duct of indoor unit1. Installation of air discharge duct 2. Installation of air return duct 3. Air duct insulationInstructions to installation Installing the suspension screwRequirements Instructions to installationOriginal concrete slab Steel reinforcement structureInstructions to installation Pipe and insulation materialHose Insulation treatmentInstructions to installation Pipe expansion dimensions as followsConnecting pipe Installing torque1. Indoor unit communication addresses setting 2.Installation check and trial operation3.Installation check Instructions to installationInstructions to installation Wiring methods4.Trial operation Failure code Instructions to installation4 Wiring of indoor unit Communication cable Shield wire H05RN-F2X1.5 mm2Failure code Failure code 3.Failrue codes maked with * are resumableHAIER GROUP