JVC NX-CDR7 manual Connecting Other Components, To remove the speaker grilles

To remove the speaker grilles

The speaker grilles are removed as the illustration below.

HolesProjections

Speaker grille

To remove the speaker grille, inserting your fingers at the

top of the speaker grille, pull towards you. Then pull the bottom towards you.

To attach the speaker grille, put the projections of the

speaker grille into the holes of the speaker.

Connecting Other Components

When you connect and use other components, refer also to the manuals supplied with them.

• DO NOT connect other components while the power is on.

•DO NOT plug in any component until all connections are complete.

To connect an analog component such as a cassette deck

Be sure that the plugs of the audio cords and the jacks on the rear of the unit are color-coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

You can enjoy playback and recording on the other connected component.

			LINE IN
			R
SPEAKERS
R		L	R
			OUT
			FM
R		L	(75 )
			COAXIAL
CAUTION :
SPEAKER	IMPEDANCE
	6	16	AM
			LOOP
			AM
			EXT
			ANTENNA
			OPTICAL
			LINE
			DIGITAL IN
			3CD
			DIGITAL OUT
			To input (REC)
	Ex.: cassette deck
			To output (PLAY)

By using audio cords (not supplied), connect:

•Between the audio input jacks on the cassette deck and the LINE OUT jacks.

•Between the audio output jacks on the cassette deck and the LINE IN jacks.

English

– 10 –