JVC NX-CDR7 manual Using Daily Timer, How Daily Timer actually works

Page 50

English

Continued

Using Daily Timer

With Daily Timer, you can wake up to your favorite music or radio program.

•You can set Daily Timer whether the unit is turned on or off (on standby).

•To correct a misentry any time during the process, press

CANCEL.

•To cancel the setting any time during the process, press

CLOCK/TIMER.

How Daily Timer actually works

The unit automatically turns on about 3 minutes before Daily Timer playback starts, then starts playing the specified source when the timer on-time comes. The volume level increases to the preset level step by step. When the timer off-time comes, the unit automatically turns off (stands by).

•Daily Timer works every day, and the timer settings remain stored in memory until you reset them.

On remote control ONLY:

1 Press CLOCK/TIMER repeatedly until the Daily Timer on-time setting screen appears in the main display.

The (Timer) indicator lights and the DAILY (Daily Timer) indicator starts flashing on the display.

• Each time you press the button, the timer mode changes as follows:

CD

DAILY

REC = ON AM 12:00 = DAILY = ON AM 12:00 = AM 12:00 =Canceled =(back to the beginning)

* “AM 12:00” is the initial setting time at the factory.

2 Press ¡ / ¢ or 4 / 1 to set the hour of the on-time, then press SET.

3 Press ¡ / ¢ or 4 / 1 to set the minute of the on-time, then press SET.

4 Press ¡ / ¢ or 4 / 1 to set the hour of the off-time, then press SET.

5 Press ¡ / ¢ or 4 / 1 to set the minute of the off-time, then press SET.

6 Press ¡ / ¢ or 4 / 1 to select the source, then press SET.

• The source changes as follows:

CD

DAILY

CDCDR LINE

AM FM

CD: Plays a disc in 3-CD Changer.

=Prepare a disc, then go to step 7 to select the disc number.

CDR: Plays a disc in CD Recorder.

=Prepare a disc, then go to step 8.

LINE*: Selects the external component connected to the LINE IN jacks.

=Make the external component ready for playback, then go to step 8.

FM: Tunes into an FM station.

=go to step 7 to select a preset station.

AM: Tunes into an AM station.

=go to step 7 to select a preset station.

*To operate the component with the Daily Timer, it also needs to have the timer function.

– 47 –

Image 50

Contents Consists of CA-NXCDR7 and SP-NXCDR7 Composé du CA-NXCDR7 et SP-NXCDR7Mises en garde, précautions et indications diverses For U.S.A For Canada/pour le CanadaContents About This Manual PrecautionsIntroduction Important notice Precautions on Disc Playback and RecordingRecording Following discs cannot be used for recordingLocation of the Buttons and Controls Remote ControlRemote Control Main Unit Press OPEN/CLOSE e to move down or up the sliding panelDisplay Window Display WindowMain Unit Timer mode indicators 45 Daily 9 REC 0 SleepUnpacking Connecting AntennasGetting Started FM antennaAM antenna Connecting SpeakersYou can connect the speakers using the speaker cords To connect an outdoor AM antennaTo connect an analog component such as a cassette deck Connecting Other ComponentsTo remove the speaker grilles To remove the speaker grille, inserting your fingers atTo connect digital components Putting the Batteries into the Remote Control Remote sensorBasic and Common Operations Press OPEN/CLOSE to move down or up the sliding panelTo adjust the input level through the Line in jacks Turning On the PowerSaving the Power Consumption while On Standby Selecting the Sources and Starting PlayReinforcing the Bass Sound Adjusting the VolumeChanging the Display Information Selecting the Sound Modes To use your own sound modeTo check the sound mode currently selected, press Creating Your Own Sound Modes -MANUAL ModesListening to FM and AM Broadcasts To change the FM reception mode Tuning into a StationPresetting Stations Press the number buttons to select a preset number Tuning into a Preset StationTune into a station you want to preset Press SETPlaying Back Discs on 3-CD Changer DiscUnfinalize appears in the main display Loading DiscsPlaying Back the Entire Discs-Continuous Play Disc tray closesPrograming the Playing Order of the Tracks -Program Play To go to another track directly using the number buttonsBasic Disc Operations To start playing a disc during playback of another discTo modify the program To check the program contentsPlaying at Random-Random Play CD1 Play ? To select the Continuous Play mode for 3-CD ChangerOther Convenient Functions CD2 Play ?To cancel the prohibition and unlock the discs To adjust the playback speedOn the remote control only Press Pitch during play To prohibit disc ejection-Disc LockPlaying Back a Disc on CD Recorder CDRTo locate a particular point in a track during play Playing Back a Disc-Normal PlayRepeating Tracks-Repeat Play On the unit only Press 0 CDRRecording on a CD-R/CD-RW REC LevelSampling frequency rate converter Optimum Power Control OPCBefore You Start Recording Auto track-markingFinalization Available recording modes-REC ModeHigh-Speed Recording Recording Any Sound Source Standard Recording To fade in and fade out the recordingWhen the source is other than 3-CD Changer To adjust the recording input levelWhen the source is 3-CD Changer To make a silent portion in your recordingCD Direct Recording Using the Direct REC buttonRecording from 3-CD Changer -CD Synchronized Recording Press Direct RECUsing the REC Mode button CD REC ? Select this to perform CD Direct RecordingUsing the REC Mode button only First Track RecordingTo stop during editing process and start recording, press Listening Edit RecordingRepeat to program other tracks During Listening Edit RecordingStart playback on the selected external component REC indicator flashes on the display for a whileRecording starts automatically when the sound signals come 1Tr. REC ? Recording a Single Track during PlayFinalizing a Disc-CD-R/CD-RW Press FinalizeOther Convenient CDR Functions Recording Track Marks Manually -Manual Track-Marking Current setting for auto-track marking appearsAuto Track indicator lights on the display About manual track-markingTurning On or Off Sampling Frequency Rate Separating Recorded TracksAutomatically-Auto-Track Space Converter Items appear as followsPress Enter Erasing Tracks Only for CD-RWPress ¡ / ¢ or 4 / 1 to select the erasure start track DisplayYou can erase all the recorded tracks on a CD-RWat a time Erasing All Tracks Only for CD-RWUnfinalizing a Disc Only for CD-RW Confirmation message appearsUsing the Timers To adjust the clock again Setting the ClockUsing Recording Timer How Recording Timer actually worksIf you have selected FM or AM as the source To turn on or off Recording Timer after its setting is doneTo turn on the Recording Timer, press SET If you have selected Line as the sourceUsing Daily Timer How Daily Timer actually worksTo turn on the Daily Timer, press SET Daily Daily Timer indicator stops flashing and remains litTo turn off the Daily Timer, press Cancel to select If the unit is kept turned on when the timer on-time comesHow Sleep Timer actually works Using Sleep TimerUsing Auto Power Off To clean the unit MaintenanceTo clean the disc General Notes To play new discsGlossary Messages Troubleshooting No sound is heardSpecifications EN,FR JVC 0901MWMMDWJEM Page Page Page Page Page Page Page Page Page Page Page Page Page Page