English
Continued
The
“UNFINALIZE” appears in the main display.
Loading Discs
On the unit ONLY:
1 Press one of the open/close buttons (0 CD1, 0 CD2, and 0 CD3) for the disc tray you want to load a CD onto.
The unit automatically turns on and the selected disc tray comes out.
•If the sliding panel is left open, it moves up automatically before the disc tray comes out.
2 Place a disc correctly on the circle of the disc tray, with its label side up.
|
|
|
Good | No good | |
|
|
|
•When using a CD single (8 cm), place it on the inner circle of the disc tray.
3 Press the same open/close button (0 CD1, 0 CD2, or 0 CD3) you have pressed in step 1.
The disc tray closes.
When loading more than one disc continuously
Press the open/close button (0 CD1, 0 CD2, or 0 CD3) for the next tray you want to place a disc onto. The first disc tray automatically closes and the next disc tray comes out.
Playing Back the Entire Discs—Continuous Play
You can play discs continuously.
1 Load discs into
2 Select a disc, and start playback.
On the unit:
1Press DISC repeatedly to select the disc you want.
2Press CD 3 / 8.
On the remote control:
Press one of the disc number buttons (CD1, CD2, and CD3).
Track No.
|
|
| CD |
|
|
|
| NORMAL |
|
1 | 2 | 3 | SPEED |
|
|
| |||
|
|
| REC LEVEL | dB |
Disc No. | Elapsed playing time |
CD playback starts from the first track of the selected disc.
•Without selecting the disc number, pressing
CD 3 / 8 starts playing back the currently selected CD.
To stop playback for a moment, press CD 3 / 8. To resume play, press CD 3 / 8 again.
To stop during play, press 7.
To remove the disc, press the corresponding open/close buttons (0 CD1, 0 CD2, or 0 CD3) on the unit.
Disc playback sequence in 3-CD Changer
When 3 discs are loaded on the disc trays, they are played in one of the following sequences.
•When CD 1 is pressed : CD 1 ]CD 2 ] CD 3 (then stops)
•When CD 2 is pressed : CD 2 ]CD 3 ] CD 1 (then stops)
•When CD 3 is pressed : CD 3 ]CD 1 ] CD 2 (then stops) * If no disc is on the disc trays,
empty tray.
If the current disc is a CD Text
You can change the information in the main display. See “To show the text information recorded on a CD Text” on page 25.
– 21 –