JVC NX-CDR7 Recording Track Marks Manually -Manual Track-Marking, About manual track-marking

Page 43

By pressing MENU, you can use (or cancel) the following convenient CD Recorder functions:

AUTO TRACK: Selects either auto-track marking or manual track marking (see the right column.)

TRACK SPACE: Automatically places a 2-second blank space at the beginning of each track on a recorded disc (see page 41).

CONVERTER: Turns on or off the built-in sampling frequency rate converter (see page 41).

TRACK SKIP: Records a skip mark to an unwanted track so that it will be skipped (ignored as if it does not exist) during play (see page 42).

TRACK ERASE: Erases the unwanted tracks on a CD-

RW (see page 42).

DISC ERASE: Erases all the recorded tracks on a CD- RW (see page 43).

UNFINALIZE: Erases the TOC (Table of Contents) of a finalized CD-RW (see page 43).

Before using the following functions explained in this section, make sure of the following.

•The following procedures are only possible when CD Recorder is selected as the source and playback is not started.

•To stop any time during the following procedures, press CANCEL.

Recording Track Marks Manually —Manual Track-Marking

When auto track-marking is activated (initial setting at the factory), track marks are recorded automatically (see “Auto track-marking” on page 29 for more details).

To cancel auto-track marking and use manual track marking, follow the procedure below.

On the remote control ONLY:

1 Press MENU repeatedly until “AUTO TRACK” appears in the main display.

• Each time you press the button, the following menu items appear as follows:

1 2 3

CD-RW

UNFINALIZE DISC

TRACK ERASE = DISC ERASE = UNFINALIZE = TRACK SKIP = AUTO TRACK = TRACK SPACE = CONVERTER =Canceled =(back to the beginning)

2 Press SET.

The current setting for auto-track marking appears.

1 2 3

FINALIZE DISC

REC LEVEL

dB

UNFINALIZE DISC

Ex.: When auto-track marking is activated (initial setting)

3 Press ¡ / ¢ or 4 / 1 to select “AUTO

TRACK OFF” then press ENTER.

The AUTO TRACK indicator goes off from the display, and auto track-marking is canceled, and now you can put track marks manually during recording.

•To put track marks during recording, press SET at the point where you want to put a track mark.

To restore auto track-marking, repeat steps 1 to 2 and select “AUTO TRACK ON” then press ENTER in step 3.

• The AUTO TRACK indicator lights on the display.

About manual track-marking

•Track marks must be recorded apart from each other by 4 seconds. If you press SET twice within 4 seconds, the second press of the button will be ignored (only one track mark will be recorded where you press SET for the first time).

•You cannot put track marks manually during CD Synchronized Recording. (Auto track-marking is activated temporarily.)

English

– 40 –

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Composé du CA-NXCDR7 et SP-NXCDR7 Consists of CA-NXCDR7 and SP-NXCDR7Mises en garde, précautions et indications diverses For Canada/pour le Canada For U.S.AContents Introduction PrecautionsAbout This Manual Following discs cannot be used for recording Precautions on Disc Playback and RecordingRecording Important noticeRemote Control Remote ControlLocation of the Buttons and Controls Press OPEN/CLOSE e to move down or up the sliding panel Main UnitMain Unit Display WindowDisplay Window Daily 9 REC 0 Sleep Timer mode indicators 45FM antenna Connecting AntennasGetting Started UnpackingTo connect an outdoor AM antenna Connecting SpeakersYou can connect the speakers using the speaker cords AM antennaTo remove the speaker grille, inserting your fingers at Connecting Other ComponentsTo remove the speaker grilles To connect an analog component such as a cassette deckTo connect digital components Remote sensor Putting the Batteries into the Remote ControlPress OPEN/CLOSE to move down or up the sliding panel Basic and Common OperationsSelecting the Sources and Starting Play Turning On the PowerSaving the Power Consumption while On Standby To adjust the input level through the Line in jacksChanging the Display Information Adjusting the VolumeReinforcing the Bass Sound Creating Your Own Sound Modes -MANUAL Modes To use your own sound modeTo check the sound mode currently selected, press Selecting the Sound ModesListening to FM and AM Broadcasts Presetting Stations Tuning into a StationTo change the FM reception mode Press SET Tuning into a Preset StationTune into a station you want to preset Press the number buttons to select a preset numberDisc Playing Back Discs on 3-CD ChangerDisc tray closes Loading DiscsPlaying Back the Entire Discs-Continuous Play Unfinalize appears in the main displayTo start playing a disc during playback of another disc To go to another track directly using the number buttonsBasic Disc Operations Programing the Playing Order of the Tracks -Program PlayPlaying at Random-Random Play To check the program contentsTo modify the program CD2 Play ? To select the Continuous Play mode for 3-CD ChangerOther Convenient Functions CD1 Play ?To prohibit disc ejection-Disc Lock To adjust the playback speedOn the remote control only Press Pitch during play To cancel the prohibition and unlock the discsCDR Playing Back a Disc on CD RecorderOn the unit only Press 0 CDR Playing Back a Disc-Normal PlayRepeating Tracks-Repeat Play To locate a particular point in a track during playREC Level Recording on a CD-R/CD-RWAuto track-marking Optimum Power Control OPCBefore You Start Recording Sampling frequency rate converterHigh-Speed Recording Available recording modes-REC ModeFinalization To fade in and fade out the recording Recording Any Sound Source Standard RecordingTo make a silent portion in your recording To adjust the recording input levelWhen the source is 3-CD Changer When the source is other than 3-CD ChangerPress Direct REC Using the Direct REC buttonRecording from 3-CD Changer -CD Synchronized Recording CD Direct RecordingCD REC ? Select this to perform CD Direct Recording Using the REC Mode buttonFirst Track Recording Using the REC Mode button onlyDuring Listening Edit Recording Listening Edit RecordingRepeat to program other tracks To stop during editing process and start recording, pressRecording starts automatically when the sound signals come REC indicator flashes on the display for a whileStart playback on the selected external component Press Finalize Recording a Single Track during PlayFinalizing a Disc-CD-R/CD-RW 1Tr. REC ?Other Convenient CDR Functions About manual track-marking Current setting for auto-track marking appearsAuto Track indicator lights on the display Recording Track Marks Manually -Manual Track-MarkingItems appear as follows Separating Recorded TracksAutomatically-Auto-Track Space Converter Turning On or Off Sampling Frequency RateDisplay Erasing Tracks Only for CD-RWPress ¡ / ¢ or 4 / 1 to select the erasure start track Press EnterConfirmation message appears Erasing All Tracks Only for CD-RWUnfinalizing a Disc Only for CD-RW You can erase all the recorded tracks on a CD-RWat a timeUsing the Timers How Recording Timer actually works Setting the ClockUsing Recording Timer To adjust the clock againIf you have selected Line as the source To turn on or off Recording Timer after its setting is doneTo turn on the Recording Timer, press SET If you have selected FM or AM as the sourceHow Daily Timer actually works Using Daily TimerIf the unit is kept turned on when the timer on-time comes Daily Daily Timer indicator stops flashing and remains litTo turn off the Daily Timer, press Cancel to select To turn on the Daily Timer, press SETUsing Auto Power Off Using Sleep TimerHow Sleep Timer actually works General Notes To play new discs MaintenanceTo clean the disc To clean the unitGlossary Messages No sound is heard TroubleshootingSpecifications EN,FR JVC 0901MWMMDWJEM Page Page Page Page Page Page Page Page Page Page Page Page Page Page
Top Page Image Contents