JVC NX-CDR7 manual Playing Back a Disc-Normal Play, Repeating Tracks-Repeat Play, Press CDR 3

Page 30

English

Notice you cannot use Program Play and Random Play while playing a disc on CD Recorder.

Playing Back a Disc—Normal Play

You can play back both finalized and unfinalized discs on CD Recorder.

On the unit ONLY:

1 Press 0 CDR.

The unit automatically turns on and the CDR disc tray comes out.

If the sliding panel is closed, it moves down automatically before the CDR disc tray comes out.

2 Place a disc correctly on the circle of the disc tray, with its label side up.

Good

 

 

No good

When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press CDR 3 / 8.

The CDR disc tray also closes and CD Recorder starts playing the loaded disc. The CDR lamps start flashing.

If you press 0 CDR again in this step, the disc tray closes, but playback does not start.

 

 

Track number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CDR

 

 

1 2 3

 

 

 

 

 

 

CD-RW

 

UNFINALIZE DISC

Elapsed playing time

Ex.: When an unfinalized CD-RW is loaded

To close the CDR disc tray, press 0 CDR again.

To stop playback for a moment, press CDR 3 / 8. To resume play, press CDR 3 / 8again.

To stop during play, press 7.

To remove the disc, press 0 CDR on the unit.

When you try to eject the unfinalized CD-R or CD-RW, “FINALIZE ?” appears and flashes in the main display. If you do not finalize the disc, press 0 CDR again.

If you do finalize the disc, press FINALIZE. (See also “Finalizing a Disc—CD-R/CD-RW” on page 38.)

Basic Disc Operations

To locate a particular point in a track during play

On the remote control:

Press and hold ¡ / ¢ or 4 / 1.

On the unit:

Press and hold ¢ or 4.

¡ / ¢ (¢): Fast-forwards the tracks.

4 / 1 (4): Fast-reverses the tracks.

To go to another track

On the remote control:

Press ¡ / ¢ or 4 / 1 repeatedly.

On the unit:

Press ¢ or 4 repeatedly.

¡ / ¢ (¢): Skips to the beginning of the next or

succeeding tracks.

4 / 1 (4): Goes back to the beginning of the current or previous tracks.

To go to another track directly using the number buttons

On the remote control ONLY:

Press the number button(s) allows you to start playing the track number you want.

Ex.: For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 32, press +10, +10, +10, then 2.

Repeating Tracks—Repeat Play

You can repeat an individual track or all tracks in a disc many times as you like.

On the remote control ONLY:

Press REPEAT repeatedly during or before playing.

Each time you press the button, Repeat Play mode changes and appears in the main display as follows:

 

 

 

 

CDR

1 2 3

 

1CD

 

CD-RW

UNFINALIZE DISC

REPEAT 1CD REPEAT 1

REPEAT OFF

(Canceled)

Ex.: When “REPEAT 1CD” is selected

REPEAT 1CD: Repeats all the tracks.

• REPEAT 1:

Repeats one track.

REPEAT OFF: Cancels Repeat Play.

– 27 –

Image 30
Contents Consists of CA-NXCDR7 and SP-NXCDR7 Composé du CA-NXCDR7 et SP-NXCDR7Mises en garde, précautions et indications diverses For U.S.A For Canada/pour le CanadaContents Precautions IntroductionAbout This Manual Important notice Precautions on Disc Playback and RecordingRecording Following discs cannot be used for recordingRemote Control Remote ControlLocation of the Buttons and Controls Main Unit Press OPEN/CLOSE e to move down or up the sliding panelDisplay Window Main UnitDisplay Window Timer mode indicators 45 Daily 9 REC 0 SleepUnpacking Connecting AntennasGetting Started FM antennaAM antenna Connecting SpeakersYou can connect the speakers using the speaker cords To connect an outdoor AM antennaTo connect an analog component such as a cassette deck Connecting Other ComponentsTo remove the speaker grilles To remove the speaker grille, inserting your fingers atTo connect digital components Putting the Batteries into the Remote Control Remote sensorBasic and Common Operations Press OPEN/CLOSE to move down or up the sliding panelTo adjust the input level through the Line in jacks Turning On the PowerSaving the Power Consumption while On Standby Selecting the Sources and Starting PlayAdjusting the Volume Changing the Display InformationReinforcing the Bass Sound Selecting the Sound Modes To use your own sound modeTo check the sound mode currently selected, press Creating Your Own Sound Modes -MANUAL ModesListening to FM and AM Broadcasts Tuning into a Station Presetting StationsTo change the FM reception mode Press the number buttons to select a preset number Tuning into a Preset StationTune into a station you want to preset Press SETPlaying Back Discs on 3-CD Changer DiscUnfinalize appears in the main display Loading DiscsPlaying Back the Entire Discs-Continuous Play Disc tray closesPrograming the Playing Order of the Tracks -Program Play To go to another track directly using the number buttonsBasic Disc Operations To start playing a disc during playback of another discTo check the program contents Playing at Random-Random PlayTo modify the program CD1 Play ? To select the Continuous Play mode for 3-CD ChangerOther Convenient Functions CD2 Play ?To cancel the prohibition and unlock the discs To adjust the playback speedOn the remote control only Press Pitch during play To prohibit disc ejection-Disc LockPlaying Back a Disc on CD Recorder CDRTo locate a particular point in a track during play Playing Back a Disc-Normal PlayRepeating Tracks-Repeat Play On the unit only Press 0 CDRRecording on a CD-R/CD-RW REC LevelSampling frequency rate converter Optimum Power Control OPCBefore You Start Recording Auto track-markingAvailable recording modes-REC Mode High-Speed RecordingFinalization Recording Any Sound Source Standard Recording To fade in and fade out the recordingWhen the source is other than 3-CD Changer To adjust the recording input levelWhen the source is 3-CD Changer To make a silent portion in your recordingCD Direct Recording Using the Direct REC buttonRecording from 3-CD Changer -CD Synchronized Recording Press Direct RECUsing the REC Mode button CD REC ? Select this to perform CD Direct RecordingUsing the REC Mode button only First Track RecordingTo stop during editing process and start recording, press Listening Edit RecordingRepeat to program other tracks During Listening Edit RecordingREC indicator flashes on the display for a while Recording starts automatically when the sound signals comeStart playback on the selected external component 1Tr. REC ? Recording a Single Track during PlayFinalizing a Disc-CD-R/CD-RW Press FinalizeOther Convenient CDR Functions Recording Track Marks Manually -Manual Track-Marking Current setting for auto-track marking appearsAuto Track indicator lights on the display About manual track-markingTurning On or Off Sampling Frequency Rate Separating Recorded TracksAutomatically-Auto-Track Space Converter Items appear as followsPress Enter Erasing Tracks Only for CD-RWPress ¡ / ¢ or 4 / 1 to select the erasure start track DisplayYou can erase all the recorded tracks on a CD-RWat a time Erasing All Tracks Only for CD-RWUnfinalizing a Disc Only for CD-RW Confirmation message appearsUsing the Timers To adjust the clock again Setting the ClockUsing Recording Timer How Recording Timer actually worksIf you have selected FM or AM as the source To turn on or off Recording Timer after its setting is doneTo turn on the Recording Timer, press SET If you have selected Line as the sourceUsing Daily Timer How Daily Timer actually worksTo turn on the Daily Timer, press SET Daily Daily Timer indicator stops flashing and remains litTo turn off the Daily Timer, press Cancel to select If the unit is kept turned on when the timer on-time comesUsing Sleep Timer Using Auto Power OffHow Sleep Timer actually works To clean the unit MaintenanceTo clean the disc General Notes To play new discsGlossary Messages Troubleshooting No sound is heardSpecifications EN,FR JVC 0901MWMMDWJEM Page Page Page Page Page Page Page Page Page Page Page Page Page Page